Drip irrigation,is an irrigation method that saves water and fertilizer by allowing water to drip

slowly to the roots of plants, either onto the soil surface or directly onto the root zone, through

a network of valves, pipes, tubing, and emitters. It is done through narrow tubes that deliver water directly to the base of the plant.

VALVES:for connecting PE pipe, PVC pipe,PVC Layflat valve

Manually or automatically operated control valves are used to turn the water on and off. Automatic

control valves are wired to a controller.

FILTER:sand filter(plastic or metal),screen filter,mesh filter

All drip systems need some type of filter to keep dirt from clogging the emitters.

PRESSURE REGULATOR:

Most drip systems operate at low pressure, usually less than 20PSI. Pressure regulators reduce incoming

water pressure to the ideal pressure for the drip system.

AIR RELEASE VALVE:

from 3/4 inch to 2inch.

Main PIPE:

rigid PVC pipe,HDPE pipe,PVC LAY FLAT hose

MICRO-TUBING:

ID 3MMx OD 5MM; ID 4MM X 7MM;ID 9MM X OD12MM

DRIP TAPE OR DRIP PIPE:

16MM is the most popular size.Directly deliver water to the plants.

EMITTERS:

These connect to the tubing or can be inside the tubing and deliver water at a slow, consistent rate,

usually, 0.5, 1, 2 or 4 gallons per hour.

FLUSH VALVE/CAP:

A flush cap is attached to the end of each irrigation line so that dirt and debris can be flushed out of the irrigation system.

Retative Chinadrip Products

microsprinkler and sprinkler family

drip tape and pe pipe family

dripper and emitter family

filter fertilizer injector and air relief valve family

all chinadrip products family

I am Janice Zhang from Chinadrip Irrigation Equipment Co.,Ltd.Contact me and will be repied soon!