Product Details

Drug stability test chamber specification

Name	Drug Stability Testing Chamber
model	LHH-150FS	LHH-250FS	LHH-350FS
Temperature range	0~65°C
volatility	±0.5°C
temperature departure	±1.5°C
Humidity control range	40~95%RH
Humidity volatility	±3%RH
Humidity deviation	±4%RH
Light range	N/A
illuminance deviation	N/A
Temperature humidity control mode	Equilibrium temperature debug mode
refrigerating system	Imported closed compressor (DANFOSS)
humidity sensor	Imports of capacitive humidity sensor (ROTRONIC)
controller	Import liquid crystal temperature and humidity table (JAPAN)
data collection	Imports have paper recorder (JAPAN)
test point	40°C 75%RH,25°C 60%RH
Temperature and humidity alarm	Deviation alarm temperature upper and lower limits
The integrated alarm system	Special alarm system
Double protection	Overtemperature protection function independently
Operating Temperature	+5~35°C
Tank (shell) material	Bladder mirror steel SUS304 (shell) steel
water box	The external tank
voltage	220V±10% 50HZ
safety device	The compressor overheating, fan, compressor overheating and overtemperature excess pressure, overload, water shortage protection
maximum power	1.5KW	2.5KW	2.5KW
capacity	150L	250L	380L
Inner size(mm)	600×405×620	680×500×730	680×510×1100
outer size(mm)	760×830×1480	840×870×1550	840×880×1750
shelves	3	3	4

Drug stability test chambe Character

Using the latest structure design, large import liquid crystal temperature and humidity table, according to a multiple sets of data display, easy to understand, convenient for observation and operation, use imported parts with high quality, suitable for long-term continuous operation, performance is stable and reliable, suitable for users of GMP certification.

1. Using the latest air duct system Settings, good uniformity of temperature and humidity in the different position.

2. Imported from enclosed industrial compressor, high efficiency, low noise, ensure the equipment run continuously for a long time.

3. Imported from temperature and humidity sensor integrated, high sensitivity, low drift, direct detection of humidity, dispensing with maintenance.

4. Imported digital temperature controllers and humidity controllers, induction, system error is small.

5. The tank material all mirror stainless steel SUS304, easy to clean without pollution.

6. Have to meet the requirements of GMP protection system, conform to GMP requirements of data acquisition system.

7. Meet ICH2003 QIA (R2), CP2010, executive standard: GB/T10586-2006.

8. The national metrology institute of metrology inspection report, certification of 3Q and deviation alarm,mobile phone short messages warning (optional)