Specifications

Low Break Down
CE certification

 

Household Hammer Mill CF158B introduction

 

 

 

The hammer mill is fixed with an engine with a power of RP-driven all kinds of different power. Its working principle is: after the raw materials were put into crushing chamber, the high-speed operated hammer sheets will impact the raw materials over and over again, then the raw materials will be crushed into pre-set size step-by-step. The sieve have the following size: 1.5mm, 2mm, 4mm and 6mm. Then the crushed materials will leak out from the sieve. The draught fan will convey the leaked materials into separator centrifuge, finally, the powder will be discharged down below, and the air will be discharged upper.

 

 Knowing your machine

 

 

Model No.	Power Electric Engine 50HZ	Wood output(kg/h)	N/G weight(kg)	Sieve screen size	Sieve screen specification	Packing Size(cm)
CF158	1 phase 2.2kw	60-120	75/95	360*160mm	1.5-10mm	48*58*63
CF158	3 phase 2.2kw	60-120	75/95	360*160mm	1.5-10mm	48*58*63
CF198	3 phase 4kw	200-300	120/140	510*200mm	2-10mm	90*58*102
CF198	7.5HP gasoline engine	200-300	120/140	510*200mm	2-10mm	96*62*105
CF420B	3 phase 7.5kw	200-400	260/320	680*280mm	1.8-10mm	112*82*107
CF420C	3 phase 11kw	200-500	320/360	680*280mm	2-10mm	112*82*107
CF420A	15HP Diesel engine	300-500	330/360	680*280mm	1.8-10mm	147*73*109
CF420A	22HP Diesel engine	300-500	350/390	680*280mm	1.8-10mm	147*74*111
CF500A	55HP Diesel engine	800-1100	800/840	820*390mm	2-10mm	150*142*123
CF500B	3 phase 22kw	800-1100	600/630	820*390mm	2-10mm	124*97*106

 

Specification 

1. This smallest wood hammer mill is most suitable for home use with small capacity and tiny dimension.
2.Equipped with hammers, this wood hammer mill is more suitable to crush soft agricultural crops such as wheat stalks, alfalfa, corn straws, switchgrass,  peanut soybean shell and bamboo.
3. A cyclone can be equipped to collect finished wood particles to prevent dust leakage.
4. This wood hammer mill can be used in home-made wood pellet production which can be used as animal bedding, heat fuel and fodder.

Ready to exported

 

 

 

 Choose a reliable wood hammer mill manufacturer.
Machines look all same outside. So the quality will be more or less similar. Please change your views right now. Wood hammer mill from small workshop must be much more cheap compared with these mills from larger factories, however, the texture of metal will be a tremendous difference. In general, stainless steel 4Cr13 means the carbon content is 0.4% and chrome content is 13%. The higher the carbon content and lower chrome content, the easier the metal to be oxidized. 

The Hummer Mill Cutter and Sieve

Wood hammer mills are able to crush both forestry and agricultural material, brittle and fibrous material, such as bamboo, stalk, grass and shrub. A screen with cutting edges is used to control the wood particle size. If the size is larger than screen, these material will be sent back to be grinded again until they can get though the screen. The size of the grinded material depend on the size of screen and the rotation speed .

 

 Working processing

In actual production, a cyclone is always a necessary device in wood hammer mill. What’s the function of cyclones? How does it work? Does the cyclone really work?

 

Cyclonic separation is a method to remove wood particles from air steam though vortex separation without filters. In wood chips and sawdust collection, rotational effects and gravity are main ways to separate the mixed air flow. This method can be also used to separate fine droplets of liquid from a gaseous stream.

A high speed rotating airflow is established within a cylindrical or conical container called a cyclone. Airflow begins at the tops of cyclone and ends at the bottom, moving in a spiral way. Wood particles out from wood hammer mill are drew up into airflow starting separation procedure. Wood chips and sawdust in the rotating steam have much inertia to follow the moving airflow. They will strike the inner wall until falling to the bottom, waiting to be collected.

The main advantage of cyclones is to reduce the dust content in air to protect your lungs and breathing system. Pneumoconioses and black lung disease are all cause by long term exposure to dust. Please taking heath into consideration when purchasing a wood processing machines.

 

 Kinds of materials

  This wood hammer mill can be used in wood pellet production which can be used as animal bedding, heat fuel and fodder.

 

Our factory certification packaging and shipping

 

 

 

                                    After-sale Service                                      
After-sale service can ensure a smooth business once you buy a machine aboard. You can inevitably encounter some operation problems while making wood pellets. Amisy can offer you 12 months warranty for main parts to protect your interests and save your money.

 

TradeManager:cn1511227029                            

Skype: chen.cealian                                          

TEL:15805353812                                          

QQ:383342040