Name: wood crusher hammer mill with cyclone
Brand: chengda machine
Availability: InStock

Product Details

Product Description

Straw grinding hammer mill---CF420C

Hammer mill is new- style and multipurpose machine, it is used for all kinds of straw, cotton stalk, alfalfa, peanuts shell and foodstuffs etc.
2. CF420C hammer mill is driven by 11kw, 380V, 50Hz electrical motor.
3. The capacity of CF420C is 200-500kg/h, it is suitable for home use.
4. It has simple construction, convenient operation, high efficiency and low power consumption.
5. CF420 can also be driven by 15hp diesel or 22hp diesel engine, we called it CF420A.

Diesel engine Driven CF420A Wood Hammer Mill

CF420C Hammer Mill Testing on 22 April, 2016

Working principle

The hammer mill is fixed with an engine and a power of RP-driven all kinds of different power.

After the raw materials were put into crushing chamber, the high-speed operated hammer sheets will impact the raw materials over and over again, then the raw materials will be crushed into pre-set size step by step. Then the crushed materials will be leak out from the sieve. The draught fan will convey the leaked materials into separator centrifuge. Finally, the powder material will be discharged down below and the air will be discharged upper.

/channel/UCw4kMpiLCH5b3gEunR4cDcg

Technical Parameters of Wood Hammer Mills

Model	Power	Voltage V/50Hz	Sieve Screen Size	Sieve Screen Size	Capacity
CF158	2.2KW	380V	360*160mm	1.5-10mm	60-120kg/h
CF198	4KW	380V	510*200mm	2-10mm	200-300kg/h
CF198A	7.5HP	380V	510*200mm	2-10mm	200-300kg/h
CF420B	7.5KW	380V	680*280mm	2-10mm	200-500kg/h
CF420C	11KW	380V	*680280mm**	2-10mm	200-500kg/h
CF420A	15HP	380V	680*280mm	2-10mm	200-500kg/h
CF420A	22HP	380V	680*280mm	2-10mm	200-500kg/h
CF500	22KW	380V	820*380mm	2-10mm	800-1100kg/h
CF500A	55HP	380V	820*380mm	2-10mm	800-1100kg/h

Main Features of Wood Hammer Mills

1. With capacity 60-120kg/h, this hammer mill can satisfy a large production demand on a daily basis.
2. The ability to change screen size, and the option of a variable speed frequency drive control, enable processing a variety of materials using the same hammer mill.
3. Both coarse and fine grinding can be realized through adjusting the gap between hammers and screen.
4. The core part ---the hammer flake is scientifically designed to have two concussion parts, thus when one part is worn out, you can turn over to use the other part.
5. The angle of the screen can be 180° which allows for high throughput at lower power consumption.
6. Equipped with air blower, the crushed material can be directly collected and transported to next machine for further processing

Hammer Mill Parts

Machine Parts
Name: Sieve
Brand: chengda
Original: China, Shandong
The hole diameter can be 1.5mm, 2mm, 4mm, 6mm, 8mm

Machine Parts

Name: Sieve
Brand: Chengda
Original: China, Shandong
The sieve is made by Iron Sheet. When we use it, please avaid metal materials put into hammer mill so that to demage the sieve.

Machine Parts

Name: Hammer Sheet
Brand: chengda
Original: China, Shandong
The hammer sheet is made by iron sheet. If we use it in a right way, we can use it more than 1000 hours.

Other Diesel Engine Powered Hammer Mills--- CF500A, CF198A, CF420A

Kinds of Raw Materials

Final Products You Can See

How to choose a good quality wood hammer mill?

Choose a reliable wood hammer mill manufacturer. Machines look all same outside. So the quality will be more or less similar. Please change your views right now. Wood hammer mill from small workshop must be much more cheap compared with these mills from larger factories, however, the texture of metal will be a tremendous difference. In general, stainless steel 4Cr13 means the carbon content is 0.4% and chrome content is 13%. The higher the carbon content and lower chrome content, the easier the metal to be oxidized.

Certifications

Packing & Delivery

Packaging
Size	11282107cm
Weight	320/360kg
Packing & Delivery	Strong plywood case as exported standard, if your order is big we suggest shipping by container, we will calculate the total volume of your order and saving shipping cost for you. Shipping: By sea, By air; Express (DHL/FedEx; Railway; Highway)

Our Company

Laizhou Chengda Machinery Co., Ltd

Our company was founded in 1992, which is a high tech that enterprise integrates new product design, development, manufecturing and international trade business.Main products: flat die pellet mill, vertical ring die pellet mill, wood chipper, hammer mill, pellet cooler and cutting wood machine etc.. Please free free to contact us if you have any inquiries and we will try our best to meet your demands.

FAQ

1. The motor can be used by customers requirements.

Can use Siemens, Yangma, etc brand.

2. The color, the looks can also designed as customers' requirements.

3. All the machines with 1-2 years warranty, safe to use and sell.

Our Service