Hydrologic Cycle Pellet Stove

Cautions before Stove Operation

   Before stove operation, please make sure all security components have been assembled in     accordance with the installation requirement , such as the Flow Control Switch, Safety Valve, and Exhaust Valve etc.

   1. The stove must be ground connection. The protection against electric shock relies on the   ground connection when basic insulation fails. Please install the appropriate capacity of leakage protector in power supply circuit.

   2. The power cord must be replaced by stove manufacturer, local service center or relevant specialist when it is damaged.

   3. Do not use stove in the environment which contains explosive of flammable gas, liquid or dust because of the fire.

   4. Someone must be on duty during the stove operation.

   5. Before stove operation, please make sure that the Water Supply Valve is open and the water tank has been filled with water.

   6. Do not place flammable and explosive articles within 0.5 meters of stove and outside smoke vent.

   7. Don’t place any covering on the stove.

   8. Keep elderly and children away from high-temperature parts of stove, such as: Fire Viewing Window Glass, Front Panel, Left & Right Side Panel, Hopper Lid and Exhaust Pipe etc.

   9. Please do regular maintenance and cleaning in accordance with maintenance instruction. Before doing maintenance and cleaning, please make sure that stove has been cool down.

   10. If a failure occurs, please shut down the power immediately and contact local dealer for a specialist.

Stove Rear Connection

Corresponding Fuel Consumption for Each Level of Heating Power