2.0mm 2.00 Stainless Steel Wire, Oil Tempered Spring Steel Wire/wire steel
USD $800 - $1,200 /Metric Ton
Min.Order:5 Metric Tons
Rayee International Corporation Limited
1.80 cold drawn spring wire for mattress, Oil-tempered spring steel wire, alambre de acero
1.60 cold drawn spring wire for mattress, spheroidizing annealing steel wire, alambre de acero
1.40 cold drawn spring wire for mattress, Spring Steel Wire for make spring, alambre de acero
1.0mm 60Si2Mn Steel Spring Wire, steel wire for spring steel clips
2.0mm 2.00 Stainless Steel Wire, Oil Tempered Spring Steel Wire/wire steel
Detail as follows: | |
Grade | 202,302,304,316,316l etc |
Standard | AISI,ASTM,GB,SUS etc |
Diameter | 0.025mm-8.0mm |
Length | As per customer's request |
Condition | Soft,semi-soft,hard |
Surface finish | Bright,matt,downy |
Packing | Packed in coil or according to customer's requirements |
Quality | Top quality |
Technology | Cold draw |
Application | Clothes,bags,construction,etc |
Productivity | 8000 tons/month |
MOQ | 1000KG |
Note | We can produce other standard as the customers' requirement |
1.Material: Q195,Q235,45#,60#,65#,70#,72B,80#,82B,65Mn
2. Surface Coating: uncoated
3. Characteristic: Patented cold drawn unalloyed steel wire of circular cross-section
High tensile strength,strict tolerance
Tensile strength within a single unit package shall be ≤100Mpa
The wire shall be dead with uniformly cast and pitch
The wire must be free from contamination,rust and mechanical damage
4. Packing type: Spoolless coils;
Catch weight coils
5. Application: Mainly used for mattress, car cushion, bicyle springs etc
6.Remarks during use and handling:
a. During transportation, handle softly and carefully, avoid bumping and damaging the steel wires. Moisture and rain prohibited. Steel wires must be stored in dry warehouse
b. Pay attention to the direction of steel wires when paying-off. Be sure the spools or coilis rotationg freely as to achieve identical tension of all the steel wires
c. If the single unit package can not be used up,the remained wire should be repacked to avoid oxidizing.
Technical parameters:
Diameter mm | Deviation mm | Tensile strength MPa | ||
B Grade | C Grade | D Grade | ||
0.30 | ±0.014 | 2010-2400 | 2300-2700 | 2640-3040 |
0.32 | ±0.018 | 1960-2350 | 2250-2650 | 2600-2990 |
0.35 | 1960-2350 | 2250-2650 | 2600-2990 | |
0.40 | 1910-2300 | 2250-2650 | 2600-2990 | |
0.45 | 1860-2260 | 2200-2600 | 2550-2940 | |
0.50 | 1860-2260 | 2200-2600 | 2550-2940 | |
0.55 | 1810-2210 | 2150-2550 | 2500-2890 | |
0.60 | 1760-2160 | 2110-2500 | 2450-2840 | |
0.65 | ±0.02 | 1760-2160 | 2110-2500 | 2450-2840 |
0.70 | 1710-2110 | 2060-2450 | 2450-2840 | |
0.80 | 1710-2060 | 2010-2400 | 2400-2840 | |
0.90 | 1710-2060 | 2010-2350 | 2350-2750 | |
1.00 | 1660-2010 | 1960-2300 | 2300-2690 | |
1.20 | ±0.03 | 1620-1960 | 1910-2250 | 2250-2550 |
1.40 | 1620-1910 | 1860-2210 | 2150-2450 | |
1.60 | 1570-1860 | 1810-2160 | 2110-2400 | |
1.80 | 1520-1810 | 1760-2110 | 2010-2300 | |
2.00 | 1470-1760 | 1710-2010 | 1910-2200 | |
2.20 | 1420-1710 | 1660-1960 | 1810-2110 | |
2.50 | 1420-1710 | 1660-1960 | 1760-2060 | |
2.80 | 1370-1670 | 1620-1910 | 1710-2010 | |
3.00 | 1370-1670 | 1570-1860 | 1710-1960 | |
3.20 | ±0.038 | 1320-1620 | 1570-1810 | 1660-1910 |
3.50 | 1320-1620 | 1570-1810 | 1660-1910 | |
4.00 | 1320-1620 | 1520-1760 | 1620-1860 | |
4.50 | 1320-1570 | 1520-1760 | 1620-1860 | |
5.00 | 1320-1570 | 1470-1710 | 1570-1810 | |
5.50 | 1270-1520 | 1470-1710 | 1570-1810 | |
6.00 | 1220-1470 | 1420-1660 | 1520-1760 | |
6.50 | ±0.045 | 1220-1470 | 1420-1610 |
|
7.00 | 1170-1420 | 1370-1570 |
| |
8.00 | 1170-1420 | 1370-1570 |
| |
9.00 | 1130-1320 | 1320-1520 |
| |
10.0 | 1130-1320 | 1320-1520 |
| |
11.0 | ±0.055 | 1080-1270 | 1270-1470 |
|
12.0 | 1080-1270 | 1270-1470 |
| |
13.0 | 1030-1220 | 1220-1420 |
|
Note: Providing engineer design as per customer's request
Rayee international Co.Ltd Steel Wire HIGH CARBON SPRING STEEL WIRE SPECIFICATION | |
Standards: |
DIN 17223-1 Round Steel Wire For Springs
DIN EN 10270-1 Steel Wire For Mechanical Springs
GB 3206-82 Carbon Constructional Quality Steel Wire
JIS G 3521-1991 Hard Drawn Steel Wire
GB 4357-89 Carbon Spring Steel Wire
YB/T 5220-93 Carbon Steel Wire For Non-Mechanical Springs
|
Steel Grade: |
|
Wire Rod: | Shagang Steel,Shougang,Angang Steel Wire Rod |
Wire Diameter: | 0.20mm-12.50mm |
MOQ: | 1 TON |
Production Ability: | 3000 tons per month |
Coil weight: | 20-1200KG |
Delivery time : | Within 7 days after receiving your deposite or L/C at sight |
Payment term: | T/T or L/C at sight |
FCL weight: | 20-25 tons (20’GP) |
Package: | in coil, with carrier, hard paper Z2,Z3,ect... |
Sample: | Available for further evaluation |
Usages: | compression spring, torsion spring, extension spring, agricultural machines, die springs, strip & wire forming springs. |
Package | in coil, with carrier, hard paper Z2,Z3,ect... |
Coil Weight | 20-1200KG |
20FCL | 20-25KGS |
Welcome to inquiry !
Contact information:
Any inquiries,pls feel free to contact us
Email:rayee2010(at)