hydraulic steel press machine for sell

This series hydraulic metal balers machine press the leftover of all kinds of metal material (steel shavings ,scrap steel, scrap aluminum ,scrap copper ,scrap stainless steel ) to be qualified furnace in the shape of cuboid ,octagon ,cylinder and so on ,which not only decreases the freight and smelting costs ,but also increase the speed of casting .This machine is mainly applicable to steel mills ,recycling industries and ferrous metallurgical works .

1.     The hydraulic driving is adopted for all types of machines. The manual and PC automatic control operations are optional.

2.     No foundation bolts for installation. The diesel engine can be equipped as driving at the place without power supply.

3.     Turning over bag type and pushing bag type are used for bag coming out.

4.     Extruding force has 8 classes, from 63 tons to 400 tons and production rate is from 0.5 tons per hour to 20 tons per hour.

5.      The chamber box size and bale size can make according to clients' requirements, can add two sides of knives on the chamber box.

The introduction of the metal compactor machine

1, without binder, these machines are mainly used to press raw materials into high-density columnar briquette or blocks (weight: 2-8kg)

2,the raw materials include metal scrap filings(as iron, copper and aluminum ,etc.), metal powders (as iron, aluminum, cooper and lead), smelting additives and sponger iron

 3,High density of final product –metal briquette. The density of the cakes or blocks shall be 5 T/m3 or more (the density and weight of briquette varying with the raw materials),

 4, saving metal scrap for melting. To melt metal scrap, since high temperature, metal scrap will be blown away by the strong heat air. If the metal scraps be melted directly, it is to waste metal materials. While pressed briquette can be directly placed into furnaces, the iron casting parts quality can reach HT 200- 250.

 5,Hydraulic press system . The machines adopt advanced hydraulic driving technology and high abrasion- resistant oil seals, the oil cylinders are processed and assembled through the newest technologies so as to prevent the pressure in the oil cylinders from being reduced in the continuous operation.

6, Hydraulic system .It is featured of durability, stable running , computer-aided 

1. All machines are hydraulic-driven with alternatives of manual or automatic control .
2. Bale-discharging alternative : turn-out , push-out , forward or manual discharging .
3. No fang bolts needed for installation ; diesel engine can be used as power when electric power is unavailable .
4. There are ten grades of baling force from 63 to 400 tons .