Product Details

Specifications

1)rotary drum dryer
2)larger capacity coampare to air flow type
3)high drying efficiency
4)one year quality warranty

1.Small wood chips rotary drum dryer application:

1) Ore: ore,slag,mineral power,limestone, quartz, fluorite powder,iron ore,metal ore concentrates, metal tailings,etc.
2) Metal: metal powder, iron powder, iron filings, steel scrap, copper filings, etc.
3) Chemical industry: gypsum powder of desulphurization gypsum stir-frying half water model and building gypsum powder,clay,diatomaceous earth, kaolin,bauxite
4) Coal: raw coal,coal slime, coal,coal ash,coal cinder
5) Sand: sand,quartz sand,moulding sand,river sand
6) Various crystals: light calcium carbonate, activated clay, magnetic powder, graphite, mineral mud, clay, lime slurry, ore slurry, phosphorus slag, aluminum red mud, feldspar powder, fly ash, blue carbon, potassium, sodium, calcium, barium and alkali metal or silicate minerals in the
alkali metal.
7) Wood: sawdust, small wood chips, wood veneer.
8) Fertilizer: compound fertilizer, organic fertilizers, inorganic fertilizers, ammonium sulfate fertilizer
9) Agriculture: straw, grass, turf.
10) Animal manure: chicken manure, duck manure, cow dung, etc.

Rotary drum dryer for sawdust

This sawdust drum dryer has larger capacity than air flow type dryer, it can dry the materials with a moisture content of 40-70% to 8-12% once directly. The largest capacity can reach 5-6 tons/hr, or we can customize the dryer for you accordingly.

Main accessories for the rotary dryer:

This dryer mainly includes the following parts: hot-balst stove, screw conveyor, drum body, cyclone dust collector, hopper and other necesary parts. The fuel for the stove can be firewood, wood chips, coal, etc.

2. Note:

• Before the installation, the place and the devices to be installed must be checked, in order to avoid other problems during the installation.

• The check should be made in the positional deviation of the pouring quality and size of the base concrete.

• The appearance should be clean without pollution, dust or sundries, The basic size and position of deviation shall meet the following requirements: the position between the size of appearance and the basic coordinates.

• The error between the vertical and the horizontal axis should be less than 20mm, with the different plane elevation errors less than 20 mm; the error size of inclination should be less than 20mm.

3,Our payment terms:
1. We usually accept T/T, L/C,
2. We take pictures of finished products before delivery.
Ways of packing:
1.Sand blasting, coat with high quality paint;
2.Product wrap by PP-Bubble
3.Load container, Spear Parts in wooden case.
Delivery
1.Ocean freight partners are: APL, COSCO, OOCL, CSCL, MSC, etc. and train shipping is also available.
2.We will remind you before boat arrival