Name: high quality Feldspar ore magnetic separator , Feldspar ore magnetic separator for mining plant
Brand: Xinhai
Availability: InStock

Product Details

high quality Feldspar ore magnetic separator , Feldspar ore magnetic separator for mining plant

Product Feature

Feldspar ore magnetic separator—Product Feature

Semi-counter-current wet permanent magnetic drum separator

Product features: the scavenging area is shorter than counter-current tank and the dewatering area is longer than fair current tank. Therefore, it has high recovery rate and concentrate grade.

Counter-current wet permanent magnetic drum separator

Product features: with a long scavenging area, and the high recovery rate and low grade tailings can be obtained even the capacity is large.

Fair-current wet permanent magnetic drum separator

Product features: dewatering area is short.

Work Principle

Feldspar ore magnetic separator—Product principle

Semi-counter-current wet permanent magnetic drum separator

Working principle: slurry is fed into cavity from the bottom of drum, and the magnetic ores fall into concentrate tank after reaching a certain height, while the non magnetic ores will enter into tailings tank along with slurry in the opposite direction with drum.

Counter-current wet permanent magnetic drum separator

Working principle: slurry flows over against drum, which create great conditions for cleaning of non magnetic ores. The non magnetic ores approach the clean surface of drum and the magnetic ores can be absorbed in the strongest magnetic field.

Fair-current wet permanent magnetic drum separator

Working principle: slurry flows in the same direction with drum.

Application

Feldspar ore magnetic separator— Product application

Semi-counter-current wet permanent magnetic drum separator

Range of application: mainly used for cleaning, and especially suitable for the minerals with particle size less than 0.15mm.

Counter-current wet permanent magnetic drum separator

Range of application: with high recovery rate, suitable for roughing, scavenging and heavy medium recovery.

Fair-current wet permanent magnetic drum separator

Range of application: apply to coarse particles or ores with low magnetic susceptibility, suitable for roughing and cleaning.

The surface of the drum can be covered with rubber which is famous for its super wear resistance

Technical Parameters

Feldspar ore magnetic separator—Parameters

Model	Drum dimensions	Average value of magnetic induction of the drum surface at ore separating area (mT)	Rotating speed of the drum (r.p.m)	Feed particle size (mm)	Capacity (t/h)	Motor model	Motor power (KW)	W (kg)
CTB-69	Φ600×900	145-180	40	00.2	815	Y90L-4	1.5	981
CTN-69				00.6				780
CTS-69				06				830
CTB-612	Φ600×1200			00.2	1020	JTC561	2.2	1050
CTN-612				00.6				990
CTS-612				06				960
CTB-618	Φ600×1800			00.2	1530	JTC561A	2	1390
CTN-618				00.6				1330
CTS-618				00.6				1340
CTB-712	Φ700×1200	155-180	35	00.2	1530	JTC562A	2.8	1510
CTN-712				00.6	1530			1500
CTS-712				00.6	1530			1460
CTB-718	Φ700×1800			00.2	2045			1579
CTN-718				00.6
CTS-718
CTB-918	Φ900×1800	165-180	28	00.2	2555	XWD4-7-35	4	4000
CTN-918				00.6
CTS-918				06
CTB-930	Φ900×3000			00.2	52100	XWD5.5-7-43	5.5	4280
CTN-930				00.6		XWD5.5-7-43
CTS-930				00.6		XWD5.5-7-43
CTB-1018	Φ1050×1800		20	00.2	4080	YCT280-5.5-19.2		3807
CTN-1018				00.6		YCT280-5.5-19.2
CTS-1018				00.6		YCT280-5.5-19.2
CTB-1021	Φ1050×2100			00.2		XWD5.5-7-43		3921
CTN-1021				00.6
CTS-1021
CTB-1024	Φ1050×2400			00.2	52100			4404
CTN-1024				00.6				5132
CTS-1024								4628
CTB-1030	Φ1050×3000	160-180		00.2	120200	XWD7.5-7-43	7.5	4431
CTN-1030				00.6
CTS-1030

Case

Kush Clients Consulting Mineral Processing

Clients of Kush project paid a special visit to Xinhai on Jan 18, 2014, for detailed communication with the Xinhai technicians. They made an estimate of the size , investment as well as earnings of the mill plant. During this meeting, based on rich experience of mineral processing and mill plant, Xinhai technicians wined the clients trusts for answering clients questions.

Kush Gold Mineral Processing Test

After the contract was signed, Clients posted to Xinhai two packages of samples, totally weight 400kg. Xinhai Mineral Processing Institute provided comprehensive mineral processing test after precious test.

The mineral processing test made an analysis to the gold content which is 4.31g/t, thus Xinhai technicians decided to recovery gold directly through the solution of CIP cyaniding, which including grinding the raw ore to 88.0% -200mush,and using lime as alkali, then adding sodium cyanide, agitating then leaching.The pulp density can reach 40%, 4kg/t of slime, 2kg/t sodium cyanide, the leaching rate of gold can get 91.45% which is perfectly good. While it was worth mentioning that the Institute noticed that if adding gravity separation, the recovery rate will not notably improved while increased the mineral processing cost. For the benefits of the customers, Xinhai technicians suggested cyaniding directly, while the customers firmly believed that with the deepen exploiting, the gold grade can increase to 8g/t, and considering finding large particles around the mine, technicians decided to adopt the solution of gravity separation + cyaniding the tailings after gravity separation.

Mine Design

Mine design, an vital part of Xinhai mineral processing EPC, was in charge of Xinhai Mining Design Institute with Class A Certification. For better suiting the actual situation of the project, technicians of the Mining Design Institute made field survey to the surroundings such as terrains, waters and power supply, then designed the construction drawing elaborately and gave 3D simulation based on the processing flowchart and the equipment selection mine processing test provided.

Installation & Commissioning

After the Equipment manufacturing and purchasing, the perfect packaging and delivery system can guarantee the security service.

Xinhai Installation & Commissioning Operation Center Project No.1 was in charge of as well as full participation the field installation & commissioning. On the one hand, they supervised the construction site to inspect any problems, on the other hand , they optimized the production and management process to improve interests for customers.

Xinhai Group

Xinhai mining was established in 1993.And was the pioneer of China beneficiation industry.Our company could provide mining machine more than 600,and have the most equipment in China.At present,Xinhai business includes Mineral Processing EPC,Wear-Resistant Rubber,LFC Machinery,and Mining Investment.

Q:Hi, are you mining machinery manufacturer?

A:Yes, we can also provide amples test, mine design, equipment manufacture, after-sale service, etc.

Q:which country have your products been exported?

A:Many country, such as India, Ethiopia and so on. And our company has agencies in Zimbabwe, Sudan and Tanzania.

Q:Can you do mineral processing test?

A:Yes, not only can do it in your country, also can back to our company

Your email address and telephone will not be shared or published!

Please fill in your need products and your message and do not forget mail and/or phone if you like to be contacted.

we are the professional machine manufacturer in China.

I need to ask you some details for sending you the more suitable quotation,

1.what is the raw material do you want to process?

2.what is the capacity per hour do you need?

3.what is the raw material input size?

4.what is the output size of your product?

Request for Quotation

Of course, free live-chat is available and you can get help immediately.Or you can send me email .

You can get the price list and a Xinhai representative will contact you within one business day.

I hope you can tell me these details,i will give you the best quotation ASAP ,thanks. Your satisfaction is our greatest pursuit, we would like to sincerely for your service! We look forward to your inquiry!