China Supplier Garnet magnetic separator , Garnet magnetic separator for sale
Garnet magnetic separator—Product Feature
Semi-counter-current wet permanent magnetic drum separator
Product features: the scavenging area is shorter than counter-current tank and the dewatering area is longer than fair current tank. Therefore, it has high recovery rate and concentrate grade.
Counter-current wet permanent magnetic drum separator
Product features: with a long scavenging area, and the high recovery rate and low grade tailings can be obtained even the capacity is large.
Fair-current wet permanent magnetic drum separator
Product features: dewatering area is short.
Garnet magnetic separator—Product principle
Semi-counter-current wet permanent magnetic drum separator
Working principle: slurry is fed into cavity from the bottom of drum, and the magnetic ores fall into concentrate tank after reaching a certain height, while the non magnetic ores will enter into tailings tank along with slurry in the opposite direction with drum.
Counter-current wet permanent magnetic drum separator
Working principle: slurry flows over against drum, which create great conditions for cleaning of non magnetic ores. The non magnetic ores approach the clean surface of drum and the magnetic ores can be absorbed in the strongest magnetic field.
Fair-current wet permanent magnetic drum separator
Working principle: slurry flows in the same direction with drum.
Garnet magnetic separator— Product application
Semi-counter-current wet permanent magnetic drum separator
Range of application: mainly used for cleaning, and especially suitable for the minerals with particle size less than 0.15mm.
Counter-current wet permanent magnetic drum separator
Range of application: with high recovery rate, suitable for roughing, scavenging and heavy medium recovery.
Fair-current wet permanent magnetic drum separator
Range of application: apply to coarse particles or ores with low magnetic susceptibility, suitable for roughing and cleaning.
The surface of the drum can be covered with rubber which is famous for its super wear resistance
Garnet magnetic separator—Parameters
Model | Drum dimensions | Average value of magnetic induction of the drum surface at ore separating area
(mT)
| Rotating speed of the drum (r.p.m) | Feed particle size (mm) | Capacity (t/h) | Motor model | Motor power (KW) | W (kg) |
CTB-69 | Φ600×900 | 145-180 | 40 | 00.2 | 815 | Y90L-4 | 1.5 | 981 |
CTN-69 | 00.6 | 780 | ||||||
CTS-69 | 06 | 830 | ||||||
CTB-612 | Φ600×1200 | 00.2 | 1020 | JTC561 | 2.2 | 1050 | ||
CTN-612 | 00.6 | 990 | ||||||
CTS-612 | 06 | 960 | ||||||
CTB-618 | Φ600×1800 | 00.2 | 1530 | JTC561A | 2 | 1390 | ||
CTN-618 | 00.6 | 1330 | ||||||
CTS-618 | 00.6 | 1340 | ||||||
CTB-712 | Φ700×1200 | 155-180 | 35 | 00.2 | 1530 | JTC562A | 2.8 | 1510 |
CTN-712 | 00.6 | 1530 | 1500 | |||||
CTS-712 | 00.6 | 1530 | 1460 | |||||
CTB-718 | Φ700×1800 | 00.2 | 2045 | 1579 | ||||
CTN-718 | 00.6 | |||||||
CTS-718 | ||||||||
CTB-918 | Φ900×1800 | 165-180 | 28 | 00.2 | 2555 | XWD4-7-35 | 4 | 4000 |
CTN-918 | 00.6 | |||||||
CTS-918 | 06 | |||||||
CTB-930 | Φ900×3000 | 00.2 | 52100 | XWD5.5-7-43 | 5.5 | 4280 | ||
CTN-930 | 00.6 | XWD5.5-7-43 | ||||||
CTS-930 | 00.6 | XWD5.5-7-43 | ||||||
CTB-1018 | Φ1050×1800 | 20 | 00.2 | 4080 | YCT280-5.5-19.2 | 3807 | ||
CTN-1018 | 00.6 | YCT280-5.5-19.2 | ||||||
CTS-1018 | 00.6 | YCT280-5.5-19.2 | ||||||
CTB-1021 | Φ1050×2100 | 00.2 | XWD5.5-7-43 | 3921 | ||||
CTN-1021 | 00.6 | |||||||
CTS-1021 | ||||||||
CTB-1024 | Φ1050×2400 | 00.2 | 52100 | 4404 | ||||
CTN-1024 | 00.6 | 5132 | ||||||
CTS-1024 | 4628 | |||||||
CTB-1030 | Φ1050×3000 | 160-180 | 00.2 | 120200 | XWD7.5-7-43 | 7.5 | 4431 | |
CTN-1030 | 00.6 | |||||||
CTS-1030 |
Kush Clients Consulting Mineral Processing
Clients of Kush project paid a special visit to Xinhai on Jan 18, 2014, for detailed communication with the Xinhai technicians. They made an estimate of the size , investment as well as earnings of the mill plant. During this meeting, based on rich experience of mineral processing and mill plant, Xinhai technicians wined the clients trusts for answering clients questions.
Kush Gold Mineral Processing Test
After the contract was signed, Clients posted to Xinhai two packages of samples, totally weight 400kg. Xinhai Mineral Processing Institute provided comprehensive mineral processing test after precious test.
The mineral processing test made an analysis to the gold content which is 4.31g/t, thus Xinhai technicians decided to recovery gold directly through the solution of CIP cyaniding, which including grinding the raw ore to 88.0% -200mush,and using lime as alkali, then adding sodium cyanide, agitating then leaching.The pulp density can reach 40%, 4kg/t of slime, 2kg/t sodium cyanide, the leaching rate of gold can get 91.45% which is perfectly good. While it was worth mentioning that the Institute noticed that if adding gravity separation, the recovery rate will not notably improved while increased the mineral processing cost. For the benefits of the customers, Xinhai technicians suggested cyaniding directly, while the customers firmly believed that with the deepen exploiting, the gold grade can increase to 8g/t, and considering finding large particles around the mine, technicians decided to adopt the solution of gravity separation + cyaniding the tailings after gravity separation.
Mine Design
Mine design, an vital part of Xinhai mineral processing EPC, was in charge of Xinhai Mining Design Institute with Class A Certification. For better suiting the actual situation of the project, technicians of the Mining Design Institute made field survey to the surroundings such as terrains, waters and power supply, then designed the construction drawing elaborately and gave 3D simulation based on the processing flowchart and the equipment selection mine processing test provided.
Installation & Commissioning
After the Equipment manufacturing and purchasing, the perfect packaging and delivery system can guarantee the security service.
Xinhai Installation & Commissioning Operation Center Project No.1 was in charge of as well as full participation the field installation & commissioning. On the one hand, they supervised the construction site to inspect any problems, on the other hand , they optimized the production and management process to improve interests for customers.
Xinhai mining was established in 1993.And was the pioneer of China beneficiation industry.Our company could provide mining machine more than 600,and have the most equipment in China.At present,Xinhai business includes Mineral Processing EPC,Wear-Resistant Rubber,LFC Machinery,and Mining Investment.
Q:Hi, are you mining machinery manufacturer?
A:Yes, we can also provide amples test, mine design, equipment manufacture, after-sale service, etc.
Q:which country have your products been exported?
A:Many country, such as India, Ethiopia and so on. And our company has agencies in Zimbabwe, Sudan and Tanzania.
Q:Can you do mineral processing test?
A:Yes, not only can do it in your country, also can back to our company
Your email address and telephone will not be shared or published!
Please fill in your need products and your message and do not forget mail and/or phone if you like to be contacted.
we are the professional machine manufacturer in China.
I need to ask you some details for sending you the more suitable quotation,
1.what is the raw material do you want to process?
2.what is the capacity per hour do you need?
3.what is the raw material input size?
4.what is the output size of your product?
Request for Quotation
Of course, free live-chat is available and you can get help immediately.Or you can send me email .
You can get the price list and a Xinhai representative will contact you within one business day.
I hope you can tell me these details,i will give you the best quotation ASAP ,thanks. Your satisfaction is our greatest pursuit, we would like to sincerely for your service! We look forward to your inquiry!