Name: professional design shaking table separation
Brand: Xinhai
Availability: InStock

Product Details

professional design shaking table separation

Our shaking table can be used for many mineral grinding,such as gold ore,copper ore,iron ore and zinc ore and so on. When you find xinhai , you find the best mining machinery manufacturers. What you need is what we do.

Advantages

shaking table separation— Product advantages
1.High rich ore rate
2.less number of times of beneficiation
3.It is convenient to observe and adjust machine
4.It consumes no reagent and little electricity

Product Feature

shaking table separation — Product feature

1 The rich ore ratio (the ratio between concentrate and raw ore) is far higher than other ordinary beneficiation methods

2 Eligible concentrates and ineligible tailings can be provided at one time.

3 Minerals are in the shape of sector, which makes it easy for observation and adjustment.

4 The partition plate can separate minerals with different properties, so different kinds of minerals can be provided.

5 It consumes no reagent and little electricity.

Application

shaking table separation— Product application
Concentrating table is applicable to fine minerals, like tungsten, tin, tantalum, niobium, other rare metals and precious metals. It is also able to process ferro-manganese and mica and reclaim iron from tailings.

Work Principle

shaking table separation— Product principle
The working principle of this machine is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.

This machine is composed of three parts, i.e. head of shaking table, surface of shaking table, as well as bearing and adjusting gradient.

1. Head of shaking table: This is eccentric connecting-rod type mechanism. The motor drives the eccentric shafts to rotate and the connecting rod to move up and down. When the connecting rod pushes down the toggle plate compression spring, the pull rod drives the table surface to move in the direction of table head. When the connecting rod pushes it upward, it, through the spring tension, drives the table surface to move in the opposite direction. When they are linked, the rotating motion of eccentric shaft is changed into horizontal alternating differential motion of table surface.

2. Shaker table for gold Table surface: It is mainly composed of vibrating roof, steel skeleton, glass fiber reinforced plastics and wear-proof surface, feed water tank, feed chute, and draw bar. The table surface adopts steel skeleton FRP composite structure. That is, glass fiber reinforced plastics are pasted on steel skeleton to form a solid glass fiber reinforced plastic surface. Its above uses abrasion-proof materials to make surface and riffle (notch groove).

3. Bearing and Adjusting Gradient Mechanism

Shaker table for gold The bearing and adjusting gradient mechanism is mainly composed of shaking support plate, adjusting seat board, saddle seat, and adjusting screw rod. The shaking support plate enables the table surface to make arc forward and backward alternating movement on vertical plane. The shaking support plate and shaking box are fixed on the adjusting seat board with gripping channel steel. When hand wheel regulating screw rod is used to get the adjusting seat board to rotate on the saddle seat, the Transverse gradient of table surface can be adjusted.

Technical Parameters

name		unit	Shaking table for coarse sand	Shaking table for fine sand	Shaking table for slime
Table dimension	length	MM	4450	4450	4450
	Width of transition end	MM	1855	1855	1855
	Width of concentrate end	MM	1546	1546	1546
Maximum feeding Particle size		MM	2	0.5	0.15
Feeding volume		T/d	30-60	10-20	15-25
Feeding concentration		%	25-30	20-25	15-25
stroke		MM	16-22	11-16	8-16
frequency		F	15-48	48-53	50-57
The table water volume		T/d	80-150	30-60	10-17
Horizontal angle		°	2.5-4.5	1.5-3.5	1-2
Vertical angle		%	1.4	0.92	----
Table thinning out angle		°	32-42	40	42
Beneficiation area		----	7.6	7.6	7.6
Table length ratio		----	2.6	2.6	2.6
Motor power		KW	1.1	1.1	1.1

Xinhai Group

Xinhai mining was established in 1993.And was the pioneer of China beneficiation industry.Our company could provide mining machine more than 600,and have the most equipment in China.At present,Xinhai business includes Mineral Processing EPC,Wear-Resistant Rubber,LFC Machinery,and Mining Investment.

this is our factory and our office building.

this is our laboratory and laboratory data.

Our customers come from all over the world, such as Xinhai EPC project ,Africa Mail 800t/d gold; Xinhai Transformation Project, Indonesia PT.NEM Gold Mine as so on. We have a lot of successful cases in America, Russia and Africa .Also we have Zimbabwe Office,Sudan Office and Indonesia Office. We will give you the best service.

this is our project in Africa.

Q:Hi, are you mining machinery manufacturer?

A:Yes, we can also provide amples test, mine design, equipment manufacture, after-sale service, etc.

Q:which country have your products been exported?

A:Many country, such as India, Ethiopia and so on. And our company has agencies in Zimbabwe, Sudan and Tanzania.

Q:Can you do mineral processing test?

A:Yes, not only can do it in your country, also can back to our company

How To Contact Us?

You can tell us the kind of ore that you want to process and the capacity that you need. We will give you the most suitable models.

Send your Inquiry Details in the Below forfree sample,Click "Send" Now.