1200000 Kcal Wood Pellet Burner for dryer equipment
USD $9,200 - $30,000 /Set
Min.Order:1 Set
Zhengzhou Taizy Trading Co., Ltd.
1. company introduction :
Connect : Coco Li
Mobile : 0086-18703683073
whatsapp/viber :0086-18703683073
wechat :0086-18703683073
Tel : 0086-371-86660712
Fax:0086-371-86660713
Skype : Taizy2025
2. details for the machine
1. Introduction of pellet burner
1. Pellet burner , burning cost is cheaper.
2.Electric save 75% than fuel save 60% than natural gas save 50%
3.Than liquefied gas save 40%, and without pollution.
4.The biomass burning machine has engine bladder, using zirconium silicon crystal.
5. Sustainable high temperature resistant, heat preservation effect is good.
2. Character of pellet burner
1.No pollution environmental benefits significantly.
2.To renewable biomass energy as fuel, realize the sustainable use of energy.
3. Pellet burner has no tar wastewater, etc. Various kinds of waste discharge.
4.Tar to gaseous form direct combustion.
5.Heating temperature is high.
6.High temperature section temperature can reach 1300°C, industry wide application.
7.Pellet burner design is reasonable, used for various equipment modification cost is low.
8.Pellet burner is furnace oil furnace gas furnace energy conservation and environmental protection reform renewal of the best choice.
10.The variable frequency automatic feeding, pneumatic ash removal, simple operation, small workload
3. Application of pellet burner
1. Pellet burner is used for coating line body enterprise oven boiler small power station boiler industrial stoves.
2. Pellet burner is used for drying equipment kitchen equipment drying equipment food drying equipment.
3. Pellet burner is uesd for highway road construction machinery and equipment industry annealing furnace fuel, gas.
Multi-fuel options : Burn various kinds of biomass raw material or molding biomass
particles(wheat straw, rice straw,corn stalks ,corn cobs, peanut shells, cotton,stalks
and etc. Of the crop, as well as branches,leaves, bark,roots,wood chips,bamboo powder,sawdust and other leftovers.
3. details parameters :
Model | Calorific value (kilocalorie) | power consumption (Kw) | consumption of fuel(Kg) | Crater center distance (mm) | The crater diameter (mm) | Dimension(mm) | Equipment protection way |
TZ20 | 20 | 1.1 | 11-40 | 630 | 140 | 1650×600×1500 | air-cooled |
TZ30 | 30 | 1.5 | 20-70 | 680 | 140 | 1650×600×1550 | |
TZ45 | 45 | 1.9 | 25-120 | 790 | 170 | 1800×700×1700 | |
TZ60 | 60 | 2.5 | 40-170 | 930 | 170 | 1850×800×1700 | water-cooled |
TZ90 | 90 | 2.6 | 60-240 | 1050 | 170 | 2300×1000×2500 | |
TZ120 | 120 | 3 | 80-350 | 1050 | 260 | 2600×1200×2700 | |
TZ180 | 180 | 5.5 | 100-550 | 1150 | 260 | 3200×1300×2700 | |
TZ240 | 240 | 7.5 | 130-700 | 1150 | 325 |
| |
TZ300 | 300 | 11 | 150-900 | 1250 | 325 |
|
4. machine pictures :
5. connect details :