November 14's MS-Series Advanced Pellet Stove with Remote Control

1. Outside: steel coating.

2. Inside: monobloc steel structure, hand welded, heat-resistant up to 1200°C.

3. Door: carbon steel, high temperature resistant, with glass-ceramic.

4. Removable ash box: it collects the ash fallen through the holes in the brazier and the glass is always clean. The box can be taken out for cleaning easily.

5. LCD control panel: it is placed on the side of the stove, simple and easy to be used. It is possible to plan the weekly switching on and off of the stove (week-end included).

6. Four-steps power setting on the temperature control: when the difference in temperature is over 5℃, the feeding volume of pellet and air volume will automatically adjust to the full-speed to heat the room; when difference in temperature is between 0-1℃, the pellet stove will be burned with lowest speed; When the room temperature is to the setting temperature, the pellet stove will be burned to keep the fire with the suitable speed.

7. Smoke outlet: ø 80 mm.

8. Electrical supply: 230V-50Hz-1Ph.

9. Remote Control: it is helpful to realize the functions of on and off; wind volume small or big; wind speed slow or fast; temperature low or high.

10. Automatically clean the dust inside the Brazier: it is solved the problem of clogging to the brazier when the ash value of biomass pellet is over 2%, and it is our patent. The users can set the time of cleaning the dust between 10-120 minutes.

11. Double layers’ heating-exchange to increase the heating efficiency more than 30%.

12 Pellet stove with leakage protection device, the leakage of electricity, automatic disconnection.

13. Fence on the Pellet Tank: it is prohibited the damage to operator’s hands.

14.the color of pellet stove is depending on your choice, but the minimum order of one color is 20 sets at least.

15.CE for MS-Series Pellet Stove