Specifications

Small Hammer Mill
*High-speed hammer
*Mainly crush mid-hardness and weak corrosive materials
*Large reduction ratio

Application of hammer mill (hammer crusher)

Hammer mill is applicable for both dry and wet crushing.It is widely used in mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc. Coal gangue, coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains, alum, brick and tile, etc. can be crushed by this equipment.

 

Working principle of our hammer mill (hammer crusher)
The motor drives the rotor of the hammer mill at high speed through the belt, and on the rotor there are many hammers. When the material get into the working area, they are crushed by the rotating hammers with high speed, then discharge the required size of the material from the outlet. The large size products which are blow expectation are brought back to the crushing area for being crushed again until they reached the required size.

Main technical parameters of hammer crusher

Model	Rotor speed (r/min)	Feed opening size  (mm)	Max feeding  size (mm)	Discharging size (mm)	Capacity  (t/h)	Motor  Power  (kw)	Weight  (t)	Overall dimension  L×W×H (mm)
PC400×400	1500	145×295	100	0-30	5-8	7.5	0.9	844×942×878
PC600×400	1000	295×450	100	0-35	10-12	18.5	1.5	1000×1100×1300
PC600×600	1000	295×570	100	0-35	12-18	45	2.14	1315×840×1501
PC800×600	1000	350×570	120	0-45	20-25	55	2.45	1515×2586×1040
PC800×800	1000	350×850	120	0-45	35-45	55	3.05	1515×2831×1040
PC1000×800	1000	580×580	200	0-45	25-40	110	6.5	3206×2210×1515
PC1000×1000	1000	580×1060	200	0-45	40-80	132	7.59	3514×2230×1515
PC 1250×800	750	650×850	200	0-45	20-50	132	11.7	2630×1780×2050
PC1250×1250	750	650×1330	200	0-45	90-110	185	13.2	2630×2180×2050
PC1400×1400	750	1050×1540	250	0-45	120-170	280	17.2	2790×2800×2310
PC1600×1600	600	1500×1785	350	0-60	220-280	450	22.8	3350×3120×2660

Mobile 0086+15038203540