High quality good performance coal rod briquetting machine charcoal rod making machine

Introduction of charcoal rod making machine

Charcoal rod making machine is the main equipment in the coal forming product line, mainly used for briquetting coal powder, coke powder, sludge, calcareousness, active carbon etc . This kind of machines has solved the problems of the finished ball with low intension, mainly used in the field of metallurgy, chemical and so on. The forming parts is made of alloy steel, passed by heat treatment, hardness testing etc special craftwork.

Charcoal rod making machine (coal rods extruder machine) is produced by using the principle of screw extrusion. It is a kind of coal-rods molding machine which will compress the good-mixed coal power into a certain intensity predetermined shapes.
Charcoal rod making machine adopts hard tooth face reducer, small size, and high bearing capacity. The internal impeller blade of Coal rods extruder adopts the thick impeller design; the impeller and cylinder lining board adopts wear-resistant materials; the life span is 4-5 times longer than the ordinary material. The exit of the coal rods in the head part adopts replaceable wear resistance alloy steel, which is easy to exchange.

Features of charcoal rod making machine1.   Stick shape with different diameter/shape;

2.   The density, strength and hardness of final briquettes are very high;

3.   Long service life of wearing parts increased from 10 hours to 4000 hours; 

4.   60% electricity cost reduction;

5.   Production efficiency increase to 2-3 times;

6.   High quality carbon,excellent quality carbin turned into special carbon;

      Carbon contents increased from 60% to 83%, extends the market both at home and abroad.

Application of charcoal rod making machine

1. coal powder 

2. charcoal powder of all kinds of biomass,such as Waste material of the sawdust, wood shavings, 

wood, branches, rice husk, peanut shell, bagasse, wine residue, cotton stalk, corn stalk, wheat straw, rice straw.

Working principle of charcoal rod making machine  1.The motor transmits power to transmission through the V-belt. 

2.At the same time, the transmission output shaft transmits power to propeller through the floating coupling.

3.The thruster of propeller push the materials forward through forming to produce the high-pressure sticks.

Technical parameter of charcoal rod making machine

Production line of charcoal rod making machine

(1).Binder mixer: It is using for dissolving and thicking binder.

(2).Crusher and mixer: It is a machine with the function of crushing and mixing together, crushing the raw material below 5mm, and mixing them uniformly. The moisture need controlled between 25%-30%.

(3).Coal briquette machine: It presses coal powder, charcoal powder, or other powders into different shapes and size.

(4).Dryer. We have vertical dryer, box dryer and mesh belt dryer. I will suggest suitable dryer according to your raw machine, shape and size.

Finished samples of charcoal rod making machine

(1)Changed molds, samples can be diversified, shisha charcoal, bbq charcoal, silver charcoal, etc. 

(2)We can offer binder formula, instant ignite formula and water-proof technique to our customers.

(3) With multiple molds, customers can produce different shape briquettes, largely save cost.

Shipping of charcoal rod making machine

(1)Wrapped with plastic,then in free fumigation wooden case with steel frame.
(2)Wrapped with plastic,loaded in standard container 20GP,40GP,40HP
(3)Nude packing, then in standard containder.

Our service

(1)Pre-sales service

a. Sales team will suggest suitable project.        

b. Technical team analyse and design special molds for you.

c. Pick you up at airport, arrange hotel-booking.          

d. Other travel arrangements.

(2)After-sales service

a. Assist you build up factory and production line.     

b. Install and maintain machines.

c. Training your workers to achieve skillful operation.  

d. Offer technical support through telephone or online videos at any time.

Company introduction

We are a 30 years factory located in "mechanical city" Gongyi city, Henan province, China. 30 dedicated development, we have become to a factory including design, manufacture, sale and after-sales service. Good product quality and finest after-sales service are our intention and goal.

Our main products are different kinds briquette machines, coal briquette machine, charcoal briquette machine, shisha charcoal briquette machine, biomass briquette machine, and other auxiliary machine crusher, dryer, feeder, conveyor machine, mixer, etc.

If you have any other questions about the machine, please send the inquiry. Contact with me at any time!