Four rollers high pressure coal and charcoal powder ball pressing machine

1.The complete production line 

As a 30 years factory, we not only can offer to you a single briquette machine, but also can we offer complete production line, including  feeder, binder mixer, crusher and mixer, briquette machine, dryer and conveyor.

Coal briquette machine production line:

If press coal briquette, we can use tractor shovel put coal into feeder firstly, then crush and mix coal powder, then we can press into needed coal briquette shape with our ball press machine, finally we need dry coal briquette with vertical dryer. 

Charcoal briquette machine production line:

2. The introduction of charcoal powder ball pressing machine

Charcoal powder ball pressing machine is used to process the coal powder into coal briquettes. Also it is used to press charcoal powder, iron powder, coke powder, aluminum, gypsum, sludge, kaolin and other powders.

290 type

360 type

450 type

650 type

850 and 1000 type

Customers overseas visiting our factory 

3. Customer working site

4. The working principle of charcoal powder ball pressing machine

Through reducer simultaneously transmitted the power to two pressure rollers and made them rotated in opposite directions. In two pressure rollers rotation, materials naturally enter into the ball molds on pressure roller and materials pressure vary from small to large with the rotation of the pressure roller. When the material is rotated to two rollers line contact points, materials pressure has reached a peak. Under enormous pressure, the powder materials are suppressed into finished ball.

5. Parameter information of charcoal powder ball pressing machine

6. Durable molds 

7. The finished products 

The finished products usually 20-60mm, can be square shape, egg-shaped, ball shape, round shape, oval shape,  column line shape, bread shape, pillow shape, etc. What's more, the molds can be customized according to customers' special demands. 

8.Packing and delivery

9. Full service of Gongyi Lantian Mechanical Plant

Pre-sales service: We can assist you analyze your particular requirements and offer you a single machine, a multi-stage production, or a complete production line. 
After-sales service: We can offer you related technical support and guide you to install the products, or send our engineer to your factory for the installation. Also we provide one year warranty for all of our products.

10. In order to offer you more accurate and reasonable quotation, please confirm follow information:

1.What is your raw materials?

2.What is the diameter and moisture of raw material?

3.Can you share me your productivity demand?

4.What is your ideal final product shape?

Any problem, please contact me:

Tel/whatsapp: +86 15937176119

Wechat: happylina1986