1) Product information: the gate valves supplied are mainly used for adjusting water, steam, oil, gas, and natural gas in chemical industries

2) Standards: AWWA, DIN3352 F4/F5, BS5163, BS5150

3) Connection type: flanged type, push-on type, mechanical joint type, plain ends type

4) Material:

  a) Body : Ductile Iron GGG500-7

  b) Wedge : D/I , core fully vulcanized with NBR or EPDM rubber

  c) Wedge Nut : Brass

  d) Stem : Stainless steel , BS970 431S29 or DIN17440x20Cr13

  e) Gasket : NBR

  f) Bonnet : GGG500-7

  g) O ring : NBR

  h) Washer : Carbon steel or Stainless steel .

5) Size: 50-400mm/2" - 16"

6) Pressure grade: PN10, PN16

7) Coating:

    a) Fusion-bonded epoxy 200-250 microns inside and out side

b) Coating as per customers' requirement

8) Package : carton for each item , wooden boxes outside .

Product drawings

1. Fast Delivery: around 10 days below 500Metric Tons after sight of Irrevocable L/C or Deposit;( lots of high quality products are in stock)
2. Quality Assured: Strictly acc. To International standard ASTM & BS & EN & JIS, with System ISO certification
3. Good Service: supplied professional technical guide free of charge at anytime;
4. Reasonable Price: to be better support your business.

We are one of the leading manufacturers of ductile iron pipe,pipe fittings,dismantling joints,flanged adaptors, couplings, valves, water meter,manhole covers,steel flanges , steel pipe,steel pipe fitting,PVC pipe,PVC pipe fitting,PE pipe,PE pipe fitting,rubber O-rings, , fasteners, pumps, motor shells and other castings and forgings. Our products are made according to different standards, such as ISO2531, EN545, EN14525, ISO4422, ISO7005, DIN3352, BS5163, DIN3202, BS2494, BS4504, EN124 and other relevant ISO, EN, BS, DIN and ANSI standards. Moreover, our products have been selling well in European, Middle East, Southeast Asian, South African and South American countries for more than 10 years. We can also make the castings and forgings according to customers' drawings or samples. Presently, we are looking forward to your inquiries and to establishing long term cooperation relationship based on mutual benefits. If you are interested in any of our products, please feel free to contact us for more details.

1.Can i get free samples?
A: Yes,we can provide you the free sample, but you need to bear their own delivery costs.
2.Can I request to change the form of packaging and transportation?
A:Yes,We can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.
3.Can i request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.
4.Can i have my own Logo on the product?
A: Yes, you can send us your drawing and we can make your logo, but you have to bear
their own the cost.
5.Can you produce the products according to my own drawings?
A:Yes,we can produce the products according to your drawings that will be most satisfy you.