Product Details

HDPE/PP uniaxial geogrid for road reinforcement made in China

Port:Qingdao

CE certificate

We have rich experience in this field.Now we have HDPE Uniaxial geogrids,PP Uniaxial geogrids and PP Biaxial Geogrid

Uniaxial geogridis made of high molecular polymer after extruded and laminated and punched into regular mesh before longitudinal stretching. This process makes high molecule in direct line state in oblong oval net structure with uniform distribution and high node intensity. This structure has rather high tensile strength and stretch modulus, especially our products of this kind have superior world class tensile strength and stretch modulus with extensibility between 2% and 5%The soil offers ideal force carrying and diffusing chain system. It has large tensile strength (>150Mpa), and is suitable for different kinds of soil. It is a prevailing reinforcement material.

Application:
Uniaxial geogrid is kind of high strength geosynthetic. It has extensive applications in dyke, tunnel, pier, highway, railway and building.

Its main applications are as follows:
1. Enhance roadbed and effectively diffuse its load to improve its stability and bearing capacity and increase service life;
2. Can bear more alternate load;
3. Prevent roadbed distortion and crack caused by the loss of roadbed materials;
4. Increase the self-supporting property of fill behind retaining wall, decrease the earth pressure of retaining wall, save cost, increase service life and reduce maintenance expense;
5. Combine anchor sprouting concrete construction method to give side slope maintenance, which not only saves investment by 30%-50% but also reduces erection time by one time or above.
6. To increase geogrid in the roadbed and surface of highways can reduce flexure, track and put off the flawing appearance by 3-9 folds and reduce the thickness of structural layer by 36%
7. It is applicable to any kind of soil, not necessary to draw material from other place, saving time and labor;
8. Simple and rapid construction will greatly reduce construction cost.

Product specification and performance parameter :

Items	TGDG25	TGDG35	TGDG50	TGDG80	TGDG110	TGDG150	TGDG170	TGDG200
Width, m	1.0 2.0 2.5
Tensile yield force per linear meter,KN/m≥	25	35	50	80	110	150	170	200
Elongation at yield,%≤	10
Stretching force for 2% extensibility ,KN/m≥	7	10	12	20	32	48	64	85
Stretching force for 2% extensibility,KN/m≥	14	20	28	48	64	90	120	145

PP Biaxial Plastic Geogrid Specification and Main Technical Data

Item	TGSG15-15	TGSG20-20	TGSG25-25	TGSG30-30	TGSG40-40
Longitudinal Tensile Strength,kN/m	15	20	25	30	40
Transverse Tensile Strength,kN/m	15	20	25	30	40
Longitudinal Yield Elongation,%	15
TransverseYield Elongation,%	13
Longitudinal Yield Strength at 2% Elongation,kN/m	5	7	9	10.5	14
Transverse Yield Strength at 2% Elongation,kN/m	5	7	9	10.5	14
Longitudinal Yield Strength at 5% Elongation,kN/m	7	14	17	21	28
Transverse Yield Strength at 5% Elongation,kN/m	7	14	17	21	28
Product Length/roll,m	50				30
Product width ,m	2/3.9/3.95

PP Uniaxial Geogrid Specification and Main Technical Data

Item	TGDG50	TGDG80	TGDG110	TGDG150	TGDG200
material	PP
Tensile Stength,KN/m	50	80	110	150	200
Elongation Ratio ,%≤	10
Tensile Strength at 2% elongation KN/m≥	12.0	26.0	32.0	50.0	70.0
Tensile Strength at 5% elongation KN/m≥	28.0	48.0	64.0	88.0	120.0
Product Length/roll,m	100	50
Product Width ,mm	2000~3000			2000~2500

HDPE Uniaxial Geogrid Specification and Main Technical Data

Item	TGDG50	TGDG80	TGDG110	TGDG120	TGDG160
Raw material	HDPE	HDPE	HDPE	HDPE	HDPE
Carbon Content(%)≥	2	2	2	2	2
Tensile Strength(KN/M)≥	50	80	110	120	160
Yield Strength at 2% elongation(KN/m)	10	23	30	35	44
Yield Strength at 5% elongation(KN/M)	25	44	60	65	85
Yield elongation ratio(%)≤	12	12	12	12	12
Length m	50
Width mm	1000~1200