Product Details

from lowest 15kg/h to highest 400kg/h sheep wool washing machine

Brief introduction of sheep wool washing machine

This sheep wool washing machine is made of stainless steel,the material is wearable and easy to clean.

Opean the door and put the dirty wool into it,add wool cleaner,shut the door,the water will into the machine automatically,select the washing time(usually 40 minutes),the machine will wash the wool very efficiency.

Technical Data of sheep wool washing machine

Model	Max.washing Capacity(kg)	Drum dimensions (mm)	Speed (r/min)	Power (kw)	Steam pressure (MPa)	Overall dimensions (mm)	Whole machine Weight(kg)
MS-10	15	550*600	35	0.75	0.3-0.6	11008501200	260
MS-20	20	550*700	35	0.75	0.3-0.6	12509401300	380
MS-30	30	700*800	33	1.1	0.3-0.6	165011001450	600
MS-50	50	800*1000	33	1.5	0.3-0.6	200013001500	800
MS-80	80	950*1220	33	2.2	0.3-0.6	205014001800	900
MS-100	100	950*1420	33	3	0.3-0.6	235014001900	1200
MS-150	150	1080*1600	31	4	0.3-0.6	250014002100	1500
MS-200	200	1080*2000	31	5.5	0.3-0.6	294014802100	1950
MS-250	250	1200*2260	31	7.5	0.3-0.6	314015002300	2300
MS-300	300	1300*2260	29	11	0.3-0.6	351418502300	2600
MS-400	400	1460*2440	29	15	0.3-0.6	420020502450	3400

Operation Method of sheep wool washing machine

Prepare all the thing before the operation to ensure the supply of electricity, water, steam and compressed air.

1 Turn on the power supply.

Turn on the power switch, the power indicator is on, turn the three-position switch towards the opposite door position. (turn on the program controller power switch, the controller time screen shows the preset time, and the temperature screen shows the environmental temperature. )

2 Opening the outer drum door

The outer drum door is push-pull type sliding door, it is quick and safe when opening the door.

When the outer door is opened, it must be pushed to the limited position.

5-3 Opening the inner drum door

Running the inside drum, keep the same level between the inside drum door and outer drum door. Push the spring lock into the inside drum by both hands. At the same time pull the inner drum door, insert the supporting pole into the U type buckle. Move the safety bolt to the safety position. Turn over the board keeping off the clothes to connect with the edge of the inner drum door, put the fabrics or take out of the fabrics.

5-4 Water Level Controlling

Put some cold water as per the fabric’s washing requirements and the fabric’s quantity. The cold water can’t be too little or too much.

5-5 Closing the outside Drum Door.

1. Turn over the board keeping off the clothes.

2. Move away the safety bolt.

3. Disconnect the supporting pole with the U type buckle.

4. Put down the inside drum slowly by hand.

5. Push the spring lock into the inside drum, and close the inside drum door and open the spring lock.

Check carefully whether the spring lock has been locked to avoid the accidents.

5-6 Closing the outside Drum Door.

Setup Program

As per the washing technology requirements of the fabric, Choose the suitable washing time and washing temperature, Turn the three-position switch towards the running position, the machine begins to run automatically according to the program. ( or design the time and temperature as per the usage and preset methods for the programmable micro-computer controller, pressing the starting button lightly. )

Finish working and stop the machine

1. When the machine finishes working, drain out of the water from the machine and close tightly the inside and outside doors.

2. Turn the three-position switch towards the Stop position. (or cut off the power of program controller.)

3. Cut off the steam and water supply.

4. Close down the general power switch.

5. If the machine needs pausing for a long time, the water from the machine must be driven away, especially after the dyeing processing.

Industrial washer/ wool scouring machine :

industrial dewatering machine:

Industrial dryer:

Photo of the whole line:

....