Product Details

Copper Ore Flotation Machine For Lead-zinc,Copper

Product Description

Our Flotation Machine's Advantages:

1.With a light structure,it's easy to install the bearing body with a good perpendicularity.

2.Wear resistance,long service life and powerful agitating force.

3.U-shaped tank reduces the ore accumulated at the bottom of the tank.

4.With light main shaft parts and the stator installed at the bottom of the tank,it's easy to install them.

The Flow Chart for Beneficiation Production Line:

1. Application of Sf Series Mining Copper Ore Flotation Machine:

Lead zinc froth Flotation machine is widely used for roughing, concentrating and counter-flotation of nonferrous metal that includes copper, lead, zinc, nickel and molybdenum, ferrous metal and nonmetallic mineral.

2. Working principle of Sf Series Mining Copper Ore Flotation Machine:

(1) After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.

(2) When the impeller of the flotation machine begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.

(3) As a result of the cenrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the coal particle and forms mineralized discharged by the scraping tool. Finally, clean coal foam is produced by this flotation machine.

(4) Coal particles that are not mineralized will be remixed, re-mineralized and re-separate through the recycle hole and the upper intake.

(5) The left pulp that are not sucked by the impeller enters intor the third tank after going through the process of the first tank, thus, flotation machine runs in cycle and discharges ore pulp through the tailing box of the flotation machine.

The flow chart of molybdemum for reference :

Packaging & Shipping

3. Advantages of Sf Series Mining Copper Ore Flotation Machine:

It increase concentrate grade by 4-6%.

It increase cycling rate by 8%.

It increase production by 12%.

The main parts of Flotation Machine:

4. Technical parameters of Sf Series Mining Copper Ore Flotation Machine:

Model		SF0.37	SF0.7	SF1.2	SF2.8	SF4	SF8
Tank capacity(m³)		0.37	0.7	1.2	2.8	4	8
Diameter of impeller (mm)		300	350	450	550	650	760
Production capability (m³/min)		0.2-0.4	0.3-0.9	0.6-1.2	1.5-3.5	0.5-4	4-8
Rotate speed of impeller (r/min)		352	400	312	268	238	191
Electric motor	Model	Y90L-4	Y100L₂-4	Y132M₂-6	Y160L-6	Y180L-6	Y250M-8
	Model	Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90L-4	Y100L-6
	Power(kw)	1.5	3	5.5	11	15	30
	Power(kw)	1.1	1.1	1.1	1.1	1.5	1.5
Size (mm)		700x700x750	900x820x950	1100x1100x1100	1700x1600x1150	1850x2050x1200	2200x2900x1400
Weight of single tank (kg)		468	600	1373	2338	2660	4130

Technical parameters of XJK Series Mining Copper Ore Flotation Machine:

Type	Effective Volume m3/tank	Impeller diameter (mm)	Capacity (m3/min)	impeller speed (r/min)	Scraper speed(r/min)	motor		Outside size four trough together (mm)	Weight t/trough
Type	Effective Volume m3/tank	Impeller diameter (mm)	Capacity (m3/min)	impeller speed (r/min)	Scraper speed(r/min)	Type	Power (kw)	Outside size four trough together (mm)	Weight t/trough
XJK-0.13	0.13	200	0.05-0.16	600	17.5	Y90L-4	1.5	2100x865x900	0.35
XJK-0.23	0.23	250	0.12-0.28	500	17.5	Y90L-4	1.5	2625x1130x1290	0.41
XJK-0.35	0.35	300	0.15-0.5	470	17.5	Y100L1-4	2.2	3012x1350x1320	0.45
XJK-0.62	0.62	350	0.3-0.9	400	16	Y100L2-4	3	3800x1500x1550	0.85
XJK-1.1	1.1	500	0.6-1. 6	330	26	Y132M-6	5.5	4680x1820x1950	1.4
XJK-2.8	2.8	600	1.5-3.5	280	26	Y160L-6	11	7750x1600x1700	2.43

More Photos about flotation machine:

We have comparable advantages on shipping :

Whole machines in the whole Beneficiation production line :