Complete wood pellet production line is the complete one to make pellet from any type of agro-forestry wastes with output 1ton/1hour;2ton/1hour; 3ton/1hour; 4ton/1hour; 6ton/1hour; 8ton/1hour; 10ton/1hour.

Features of Biomass pellet line

Compact structure, small occupation, low consumption and high efficiency.

Raw materials
Suitable raw materials: Wood waste(a variety of spices of trees, lumber, timber, shrubs, sawdust, saw shavings, twigs and branches). Sawdust,groundnut shell, sugarcane biogases, caster shells/stalk, coffee husk saw dust, paddy straw, sunflower stalk, cotton stalk, tobacco waste,mustard stalk, jute waste, bamboo dust, tea waste, wheat straw, palm husk, soybeans husk, leaves, grass, coir pitch barks/straws, rice husks,forestry wastes, wood chips and other kind of agro wastes(rice husks, corn cobs, peanut shells, sunflower seed shells, coconut shuck, coffee grounds, straw stalks, cotton stalks, palm empty fruit bunches).

Finished pellets

Machines of biomass pellet line

1. Raw materials pretreating section
Drum Wood Chipper (chip the raw wood into small pieces);
If the raw materials are grass or corn stalk, we need to use chaff cutter.

2. Drying section
Dryer (reduce the raw material’s moisture to a suitable level for pelletizing);
The best moisture content to pelletizing is about 14-16%. raw material shall be pretreated well to achieve regulated moisture content and

size. Generally, moisture content of material ought to be remaining around 13%-15%.

3. Crushing section

Hammer Mill (grind the small pieces of wood into nearly powdery form for easy pelletizing);
Depending on the different input material, we fit out the suitable Crushing machines. If the raw material is the Straw Baler, we developed the series Baler Crusher adopting the foreign advanced technology. If the raw material is big logs with diameter less 300mm or big timber cutter, our BX-Series Chipping and Crushing Machine is your best choices; while SFSP-series Hammer Mill is widely used to crush each kind of straw, wood chip, tree branch, bark and leftover bits from agricultural wastes. The best moisture content in the Crushing Process is less 20%, and the thickness of the wood chip is less 5mm.

4.Pellet making section
Wood pellet machine takes biomass waste as raw material to make pellet fuel which is a kind of renewable energy replacing fossil fuel.

Pelletizing is the process of making waste materials into solid fuel. The objects are used for burning purposes. Wood pellet machine is used to process raw materials into wood pellets. It is the corn component of the whole line, which can decide the capacity of the whole wood pellet line.

5.Cooling system

6. Screening section
Sieving (remove the dusts and crushed pellets);

7. Packaging section
Packing (pack the pellets into bags of required sizes);

biomass pellet line picture