Specifications

water treatment flocculation agent 

1. Product Description

Anionic polyacrylamide(APAM)series products are water-soluable linear polymers synthesized under high degree polymerization,easily soluble in water,almost insoluble in benzene,ether,aliphatics,acetone and other common organic solvents .at the meantime,APAM series products also have valuable properties like flocculation,thickening,shear property,drag-reduction and dispersibility.thus widely used in oil recovery,

mineral processing,coal washing,metallurgy,chemicals,paper,textile,sugar,medicine,environmental protection,building materials,agriculture and other industtries.

3. Application

(1)Displacement agent for tertiary recovery of oilfield.

It can adjust the rheology of water injection,increase the viscosity of fisplacing liquid,improve the spreading efficiency of liquid displacement ,bring down the water permeability in strata and keep water and oil to flow at a constant speed.it is mainly used in tertiary recovery of oilfields.injection of each ton of PAM products can help to gather 100-150 tons extra crude oil.

(2)Drilling mud material.

 Used as drilling mud additives in oilfield exploration and development and geology,water conservacy and coal exploration.i can prolong the bit’s life,raise the drilling rate and drilling footage,reduce the time of exchange drills.it has abvious effect in avoiding well collapse.it can also be used as oilfield fracturing fluid and profiling water blocking agent.

(3) Industrial wastewater treatment.

 Especially for the treatment of wastewater containing suspendent particles which is coarse,high concentration and with positive charges and water’s PH value is neutral or alkaline.most effective for wastewater treatment of iron and steel plant,electroplate factory,metallurgy and coal washing.

(4)Drinking water treatment.

Many water plants in China come from river water,which contains large sum of sediment and mineral,very turbid.after precipitation and filtration,it still can not meet the requirements.flocculant is needed.water plants used to use inorganic flocculants.but large additive amount is required which caused the increase of sludge volume,not effective.use anionic PAM flocculants,with 1/50 additive amount that of inorganic flocculants,several times and even dozens of times effectiveness obtained than that of inorganic flocculants.for those organic polluted river water,better effectiveness can be achieved while mixed used together with cationic PAM.

(5)Papermaking additives.

Can be used for caustic soda’s clarification.used as retention aid,filter aid,reinforcing agent for wet and dry paper.

(6)Clarifying agent in sugar refining industry.

(7)Additives and adhesives in aquatic product feedstuff.

4. Instruction for use

(1)It's very important to make the efficient dispersion during using, otherwise will cause agglomerate and "fish eyes", dissolving time will be longer.

(2)Low-hardness water for use; avoid adopting such tank or pool, which will influence on water quality.

(3)Improve the water temperature to accelerate the dissolving velocity, but not exceed 50.

(4)Stirring will accelerate dissolving, but tough stirring will make the dispersant chain broken and degradation. Shipshape agitator with 200 - 500 rpm is the best choice.

(5)Commonly mix the product into 0.05%--0.5%(w/w)solution as reserve.

(6)Adjust the optimum dosage of product according to application condition.

5. Product package

25 Kg paper plastic three-in-one compound woven bags, or according to users’ requirement;

Its shelf life is 2 years.

 *packing

*R&D

*selection testing

*workshop

*warehouse