Name: Japan Mitsubishi Tension Meter LM-10PD
Brand: MITSUBISHI
Availability: InStock

Product Details

Japan Mitsubishi Tension Meter LM-10PD

Original Place : Japan

Brand: MITSUBISHI

Model No. : LM-10PD 100% Quality Guarantee

MITSUBISHI TENSION LM-10PD

LM-10PD tonometer used to get significantly in the detector from the LX-TD tension and strain ceremony pass salty Zhang, wire, various film unwinding, rewinding and intermediate shaft so the tension signal, whilethe instrument the apparatus of the amplified signal output to the recording apparatus, the peripheral tension meter, programmable controller, etc.

Feature:

1. Compared with the company's previous models, greatly realized Product miniaturization, lightweight

2. Automatic zero, span adjustment: a key type tension detection zero, span adjustment

3. Parameters set number officer

4. Tension lower limit on detection function (2 point detection)

5. Tension peak memory function

6. Supporting the use of the Strain ceremony sensor

7. The output filter can adjust alone

8. Can manually display, output bias and span adjustment

Specifications

Power Supply	AC85~264V 50/60HZ 50VA
Tension signal output	1.Voltage output: 0~5V,0~10V,1~5V/FS 2.Load resistance:1 k Ω or above 3.Current output: 4~20mA/FS 4.Load resistance:500 Ω or below
Tension detection output	1.Set value: 0~2000N, X10N 2.pen-collector output: DC30V/0.5A
External tension meter used output	1.DC1mA(Internal impedance 1.5KΩ or below)
Record meter used output	1.Output voltage: 0~5V 2.Load resistance: 10KΩ or above
Display	1.Full scale set: 0.01~20000N 2.unit: N or X10N
Working environment	1.Ambient temperature: 0~50°C 2.Ambient humidity: 35~80% 3.Vibration: Less than 0.5 G 4.Environment Does not allow corrosive gases and dust, rain
Weight	About 0.5kg