carbide welding insert/tungsten carbide tipped tool/tungsten carbide brazing tip
1.grades and applications
Grade | Density g/cm3 | TRS N/mm2 | Hardness(HRA) | Application recommended |
YF10.1 | 14.80—15.15 | ≥1880 | ≥91.0 | Suitable for drawing dies to draw small diameter ferrous wire and non-ferrous metal wire a high speed |
YF10.2 | 14.30—14.65 | ≥2430 | ≥91.8 | Suitable for strips to make wood-working tools |
YL80 | 13.75—14.05 | ≥3200 | ≥89.5 | Suitable for plates to make die blanks |
YL90 | 13.50—13.70 | ≥2500 | ≥82.5 | With high strength and toughness, suitable for making large size reducing die, better than YG20C. |
YG6A | 14.80—15.10 | ≥1580 | ≥91.5 | Suitable for semi-finishing of cast, nonferrous metal and low-alloy steel |
YG6X | 14.70—15.10 | ≥1600 | ≥91.0 | Suitable for drawing dies to draw steel wire, on-ferrous wire and rods with small diameter at a high speed |
YG6 | 14.70—15.05 | ≥1670 | ≥89.5 | Suitable for drawing dies to draw steel wire, on-ferrous wire under a diameter of 20mm and tubes under a diameter of 10mm |
YG8 | 14.60—14.8 | ≥1840 | ≥89 | Suitable for drawing dies to draw steel wire, on-ferrous wire and alloy rods, tubes, also for making wear parts, tools(such as muzzles, grinders, drills ect.) |
YG15 | 13.90—14.20 | ≥2700 | ≥86.5 | Suitable for drawing dies to draw steel rods and tubes at a high compression ratio, also for heading dies, drills etc. |
YG20 | 13.40—13.70 | ≥2480 | ≥84.5 | Suitable for punching and heading dies |
Other grades may be offered by customers' requirements.
2.other pictures
3.We are Zhuzhou xiangrui Cemented Carbide Co,.Ltd fouce on producing high quality cemented carbide products for 10 years.
our products have good reputation all over the world
please feel free to contact with me Ms Joyce Yang .