Machine For TO Make the pellet in home
USD $1,000 - $50,000 /Set
Min.Order:1 Set
Gongyi Tongli Mechanical Equipment Manufacturing Factory
Our company main products are: granulating machine, straw pellet machine, pellet mill, wood pellet machine, sawdust machine granule, biomass fuel pellet machine, pellet machinecomplete sets of production lines of a list of products.
Biomass energy vertical ring die pelleter: is my company carefully developed the first domesticstyling products. It absorbs the essence of domestic and foreign granulator, for "heart partassembly structure of two layers of mould" unique "; and the pressing wheel" with high alloy wear resistant material and refined, the life of wearing parts are similar products several times;automatic filtering oil transmission structure in place, lubrication. With unique design,reasonable structure, low consumption and high efficiency, strong wear resistance and other characteristics, to fill the domestic blank ring die pelletizing vertical feed, reached the international advanced level.
This product suitable pressing difficult to bond, forming hard materials, such as: rice husk,shell of sunflower seed, peanut shell melons shell, branches, trunks, bark and other kinds of wood waste; all kinds of crops straw; rubber, cement, slag and a variety of chemical raw materials. Used for biomass fuel plant, power plant. Wood processing plants, fertilizer plants,chemical plants, is a small investment, quick effect, compression molding the ideal equipmentfor dense no risk.
The differences between the two, main performance and similar products
A, six big characteristics:
1, vertical feed, place directly.
2, the mold still, roller rotating, materiel, cloth around.
3, die two layers, the upper and lower dual-use, fall this synergism; can also be dual use, high energy saving.
4, the annular mould, vertical structure, conducive to the granulating chamber radiation cooling.
5, independent of the discharging device, ensure the pellet formation rate.
6, independent of the lubricating system, which can realize non automatic lubrication.
B, three big difference:
1, die upward, vertical feed, place directly, facilitate cooling: inlet side ring die pelletizingmachine with light materials, the proportion of very difficult to enter the granulating chamber,need special device for force, but will cause uneven feeding; the most important is the use offeed design so, does not favor the granulating chamber radiation cooling, which restricts thetransmission system (gear, bearing) life. Flat mould granulating machine has two kinds ofstructure, although vertical feed, but there are many disadvantages difficult to lift the:
(1) the mold disc rotation, sliding flat mould granulating machine roller structure, material easy arching, causing feeding is not, affect the yield;
(2) die plate static, roller rotating, flat die granulator such not arch, but the centrifugal force generated, put into the material chamber material thrown to the periphery, make granulationhole upward and uniform pore distribution plate mold center without pressing, resulting in material accumulation, thickness all.
2, mould pressing wheel rotating, stationary, materiel, uniform peripheral: with the help of a rebound effect is two storey high confining mold, the feeding of the raw materials are evenly distributed on the inner surface of the nature of the annular mold. While the general ring die pelleter is pressing wheel static, die rotating centrifugal force, not to speak of, the uneven distribution of materials. Although the wheel to rotate to generate centrifugal force pressureflat mould granulating machine, but the die hole and the centrifugal force generated to the direction and inconsistent.
3, two layers of mould, multiple functions, high efficiency: die has upper and lower two parts,can choose two kinds of different specifications of the aperture, produced two kinds ofparticles of different specifications of the finished product. When the pressing material and good bonding, available plus high pressure wheel and two layers of mould, production reached four times the effect. Any flat die ring die, is not to be.
Technical parameters:
Type | LGX-1600 | LGX-900 | LGX-750 | LGX-550 | LGX-450 | |
Power (kw) | The main machine | 160 | 90 | 75 | 55 | 45 |
The discharging device | 2.2 | 1.5 | 1.5 | Spindle drive | Spindle drive | |
Electric grease pump | 0.37 | 0.37 | 0.37 | 0.37 | 0.37 | |
The main machine weight ( t ) | 12.2 | 6.8 | 5.6 | 3.6 | 2.9 | |
The main shaft speed (r/min) | 1450 | 1450 | 1450 | 1450 | 1450 | |
The working voltage (v) | 380 3 phase | 380 3phase | 380 3phase | 380 3phase | 380 3phase | |
The mold disc diameter (mm) | 850 | 550 | 500 | 450 | 400 | |
Grain specifications (mm) | 4-12 | 4-12 | 4-12 | 4-12 | 4-12 | |
Preparation of grain temperature (℃) | 80-100 | 80-100 | 80-100 | 80-100 | 80-100 | |
The raw material water (%) | 15-25 | 15-25 | 15-25 | 15-25 | 15-25 | |
Production (t/h) | 2-2.5 | 1.2-1.5 | 1-1.2 | 0.8 | 0.6 |
1. Before Sale: help you to set a purchase plan according to your requirment
2. During Sale: accompany you to check the performance of the machine; train technical stuff for you
3. After Sale: Sent artisan to your place and help you with the installation
Tongli Mechanical Equipment Manufacturing Factory is the 20th built in the 1980s-branch, the trade and industry as one of the heavy machinery manufacturing enterprises. Specialized in modern building materials equipment R&D, design, manufacturing and engineering technology services,
we have accumulated a wealth of economic strength and human resources. Senior technical of the technology management team in the country was more than 40percent.
Our company always strives for the survival by the quality, strives for the development of science and technology, market-oriented, in good faith as a fundamental, in a pioneering and innovative, honest, trustworthy business philosophy, quality first, service first, reputation first for the purpose , providing our customers with quality products.
cooperate partners
50% pre-payment,we will commence production of the machines upon recieving the first payment. The outstanding balance should be paid in full before the goods can be shipped.
Delivery
within 15 days.