Product Details

Genset can run at rated power on the conditions:

Atmospheric Pressure: 100kPa, Ambient Temp: 20°C, Relative Humidity: 30%.

Acceptable Condition:

Ambient Temp 0°C~+40°C, Relative Humidity <90%(20°C), Altitude ≤1000m above sea level.If it the alititude is >1000m ,Please contact me .

Engine Brand & Model KTA38-G9

Alternator Brand & Model Leroy Somer LSA50.2M6

Control System Deepsea DSE6020

Standard Noise Level@7m (Soundproof Sets) 75 dBA

Circuit Breaker Type 3 Poles MCCB

Frequency & Phase 50Hz, 3Phases + 4Wires

Engine Speed (RPM) 1500

Fuel Consumption (L/hr) 100% Load 248

75% Load 186

50% Load 126

25% Load 64

Standby Power 1250 kVA 1000 kW

Prime Power 1125 kVA 900 kW

Voltage type 50Hz,400V/230V, 3 phases and 4 wires

Model	KTA38-G9
Standby Power (kW)	1089
Rated Speed ( r/min)	1500
Bore×Stroke (mm×mm)	159×159
Displacement (L)	37.8
Compression Ratio	13.9:1
Fuel Injection Pump	Direct injection Cummins PT
Governor	Electronic
Steady Speed Droop	≤1%(Electronic Governor)
Lubricant Capacity(L)	32.7
Coolant Capacity(L)	35.7
Aspiration	Turbocharged and After-cooled

1. Cylinder Block:

High-quality alloy cast iron for rigidity performance and good stability, wet and replaceable cylinder liners for better heat rejection performance.

2. Head and Valve:

4 valves per cylinder optimize the mixed level which leads to an excellent fuel consumption rate and emission performance. High-quality alloy cast iron and two cylinders with a head.

Big diameter crankshaft and specially designed outline for better reliability and durability.

3. Crankshaft and Rod:

Robust and fully balanced crankshaft designed for more steady rotation and higher strength. Steel piston crown with oil gallery and aluminum skirts for better durability and low oil consumption.

4. Fuel system:

Unique Cummins PT fixture and Step Timing control for precise fuel injection, making fuel injection pressure above 120Mpa, which leads to an excellent fuel consumption rate and emission performance.

5. Lubrication system:

Dual spin-on filter can separate impurity above 10μm effectively. Low pressure (240-310Kpa) and steady temperature (100-120℃) system can reduce auxiliary power waste of lubricating oil pump.

7. Cooling system:

Great water pump and special channel design guarantees effective cooling process. Spin-in water filter makes coolant clean and keep it in normal acidity.

8. Exhaust system:

Advanced turbocharger and after-cooler technology, excellent fuel consumption rate and emission performance.

9. Electrical system:

24V cranking motor and 55A battery charging system. EFC governor system provides a perfect and instant response.

MORE DETAILS ABOUT THE ENGINE ,ALTERNATOR AND CONTROLLER.CONTACT ME AT ANY TIME.

CAMDA PART-2

ATTENTION:

OPEN TYPE :JUST THE GENSET

SILENT TYPE: THE GENSET+THE SOUNDPROOF CONTAINER(MORE EXPENSIVE THAN OPEN TYPE)

1.Testing Platform to test the genset's avaliability before shipping.

2.Plastic Wrap around it as you can see from the picture.

3.Make it into the canopy

4.Get the mask of the container.

Our mission and Service:

Service Objective:Service a client ,a customer satisfication
Service Concept:Through the Personalized services.bring customer value maximization,so as to realize their own value maximization.
Sevice Commitment: The first sale credit ,then sell products.Loyal customers,integrity services,satisfy customer personalized needs.
Service Standard:No can't do ,only that you dare that you do not to think, there is no best ,only better,service tracking,reply within 24hours.
Service Politicies:Serious first,Smart second. Determinition first,success or failure second. Speed first,Perfect the second. Results first,the raason second.

A:Various diesel generator sets from 21KW-1320KW

B:Optional

1. Sound-proof canopy

2. CHP system

3. Grid parallel system

4. Remote radiator

5. Auto oil filling system

6. Water heater

7. Oil heater

8. Gas leaking detector

9. Flame detector

10. Gas scrubber