Product Details

Specifications

wifi 3G gateway
1.Industrial grade TD-SCDMA gateway
2. RS232/RS485/RS422/TTL, Ethernet, wifi
3. Standard WAN port and PPPOE

TD-SCDMA 3G industrial wifi gateway

WIFI Wireless parameters

Item

Content

WIFI module

WIFI module chip-embedded, high integration, good stability

WIFI standard

Support 802.11 a/b/g/n standard, speed,

support 6M/9M/12M/18M/24M/36/48/54Mbps,up to 108M

Encryption

Supports WAP encryption, built-in WAP and WAP 2.0, Built-in 64-bit and 128-bit

WEP encryption, Support WEP encryption, built-in 802.11I 4.0 WEP (128-bit and 64-bit)

TKIP, AES and CCMP and other hardware security engine

AP mode

Support AP mode

Transmission distance

Outdoor non-stop, outdoor coverage up to 150 meters

TD-SCDMA Wireless Parameters

Item	Content
Wireless module	use industrial wireless module
Standards and frequency bands	TD-SCDMA/HSDPA/HSUPA:2010~2025MHz GSM/GPRS/EDGE:850/900/1800/1900MHz Support 3GPPclass B
Coding scheme	TD-SCDMA/HSDPA/HSUPA/EDGE/GPRS mode
Communication bandwidth	Downlink (Max up to 2.8Mbps) Uplink (Max up to 384Kbps)
Transmit power	<24dBm
Receiver sensitivity	<-108dBm
Function support	Support data, voice, SMS and fax

Interface Type:

Item	Content
WAN port	one WAN port (Line0), supports PPPOE
Ethernet port	Four 10/100 Base-T Ethernet port(LAN1-LAN4), Ethernet IEEE 802-3, 802-2; built-in 1.5KV magnetic isolation protection
Serial port	1 RS485 interface 1 or RS232 serial port (support RS422/TTL) Data bit: 7,8 bit Stop bits: 1, 2-bit Parity: no parity, odd parity, even parity, SPACE and MARK parity Serial speed: 110bps ~ 230400bps Flow Control: None flow control, RTS / CTS hardware flow control or XON / XOFF software flow control
USB interface	one USB interface, USB2.0, HOST interface, speed at 12Mbps
Indicator LED	“POWER” , wide area network “WAN”, communication “COMM”, “WIFI”, Ethernet port and online “LINK / ACT” indicator
Antenna Interface	Standard SMA female interface, 50 ohm; optional 3M/5M/10M/15M antenna extension cable, meet the different needs of customers
UIM interface	1.8V/3V/5V standard putter user card interface, built-in 15KV ESD protection
Voice Interface	Standard headset interface (requires software)
Power Interface	Standard 3-pin power jack
RESET button	Reset button to restore factory settings