2" DN65 liquid nitrogen flow meter with 1000LPM and plastic injection molding
Short Tube Type | |||||||
Technical Parameters | |||||||
Model | Flow rate (water 20°C) | Size (mm) | Socket end | BSP Thread | Flange | Condition | |
L | D1 | ||||||
LZB-15S (with guide rod) | 5-50L/h | 200 | 20 | Φ20 | G1/2” | DN15 | Pressure: <=1(MPa)
Accuracy: ±4%
Temp (°C): 0-60 (Water) |
6-60L/h | |||||||
10-100L/h | |||||||
16-160L/h | |||||||
25-250L/h | |||||||
40-400L/h | |||||||
60-600L/h | |||||||
LZB-25S (with guide rod) | 100-1000L/h | 226 | 32 | Φ32 | G3/4” | DN25 | |
160-1600L/h | |||||||
250-2500L/h | |||||||
300-3000L/h | |||||||
LZB-32S (with guide rod) | 400-4000L/h | 288 | 40 | Φ40 | G1” | DN32 | |
600-6000L/h | |||||||
LZB-50S (with guide rod) | 0.4-4m3/h | 341 | 63 | Φ63 | G1-1/2” | DN50 | |
0.6-6m3/h | |||||||
1-10m3/h | |||||||
1.6-16m3/h | |||||||
LZB-65S (with guide rod) | 5-25m3/h | 430 | 75 | Φ75 | G2” | DN65 | |
8-40m3/h | |||||||
10-50m3/h | |||||||
12-60m3/h | |||||||
LZB-80S (with guide rod) (Flange) | 5-25m3/h | 533 |
|
| None | DN80 | |
8-40m3/h | |||||||
10-50m3/h | |||||||
12-60m3/h | |||||||
LZB-100S LZB-125S LZB-150S (with guide rod) | 8-50m3/h | 555 |
|
| None | DN100 DN125 DN150
| |
10-60m3/h | |||||||
14-90m3/h | |||||||
18-120m3/h | |||||||
18-150m3/h | |||||||
20-180m3/h | |||||||
20-200m3/h | |||||||
20-220m3/h | |||||||
(1)Before installation, take out foam supports in the tube carefully. Make sure therubber ring is installed correctly on the indentation.
(2) liquid nitrogen flow meter can be equipped with ABS pipe or PVC pipe by using special glue to connect. It also has flange connection or thread connection.
(3) liquid nitrogen flow meter should be installed vertically and be convenient to read the scale. When reading, keep the sight and the float horizontal.(General standard: the best flow to be measured should be 50%~70% of max flowrate. Try not use the maximum value.)
(4)The straight lengths of both inlet and outlet pipes connected with the flowmeter should be more than five times of the flowmeter’s length.
(5)The pressure of liquid should be stable. If the pressure of liquid is not stable, it will lead the wave of floater and cannotmeasure correctly, and a buffer or setting adjuster should be set above the flowmeter.
The flowmeter can be installed in any position without affecting the accuracy, which can be installed in horizontal or vertical piping, even upside down. Z-60, Z-65 can be equipped with upper and lower limit alarm switch.
Tips:
1. liquid nitrogen flow meter can wrap with PTFE for acid water.
2. liquid nitrogen flow meter can deploy with flange.
Shipping Ways:
1. By express: DHL, TNT, UPS, FEDEX, EMS etc, usually for small or regular and urgent orders;
2. By sea transportation for bulk quantity;
3. By air transportation.
Delivery time:
Shipping times are approximately 5-7 days for sample orders and 7-15 days for regular orders, after payment is done instantly by T/T, W.U. (weekends not included).
If we have any stock for your order, we will shipped out goods immediately on receipt of your payment.
Returns:
Situation 1
If no quality problem, there is no returns or refund. If there’s any problem not caused by us, we are pleasure to fix it by sending some spare parts to you, and please bare the shipping cost.
Situation 2
For any quality problem caused by us, we provide refund for returns made within 15 business days of the delivery date. Or we fix it or make new ones for you as request.
Payment:
We accept TT payment(Bank Transfer), L/C, Western Union & Cash, etc..
Please remember to send us scaned recipt of T/T or other payment copy by Email, this will speed up the processing of your order.
Warranty
All our products have at least 1 year warranty. If there’s any quality problems during the warranty period, we ship new spare parts for replacement free for you, or we accept return policy.