flat die corn stalk pellet machine

the corn stalks, wheat straw, cotton stalks, rice straw, rice husk, peanut shell, corn cob, wood, branches, leaves, sawdust and other crops in rural areas , solid waste,palm fiber, furfural-residue, edible fungus dregs,and Chinese herbal medicine residue etc.

Pellets features:

       After forming the straw charcoal, the fuel boast smaller size with greater weight, high burning rate , easy to store and convenient to transport, and its size is only equal to 1 / 30 of the original straw and its density is 0.9-1.4g / cm3, and its calorific value can reach about 3500-5500 kilocalorie, so it can be called as high-volatile solid fuels.

Advantages of machine to make wood pellets

1) full automation : it has the automatic oil-supply device ,

 you don't need to add oil for the roller every 2 hours by yourself , 

so the machine can keeps on working a full day without a stop.

2) the ring die : both sides of the ring die can be used , thus the life time of the molds 

can be reach up to produce 2000 ton pellets 

3) less labor , one people is enough to operation the machine

4) wearing parts : the wearing parts of the machine are the gear of the roller , molds , 

only these two parts , we have them in stock

5). Well adaptable: it could put all kinds of raw material into briquetting machine (If larger, crusher should be used).

6). High Automation: 2 workers are enough to operate all the process.

7).The wide scope of raw material: the corn stalks, wheat straw, cotton stalks, rice straw, rice husk, peanut shell, corn cob, branches, leaves, sawdust and other crops in rural areas , solid waste, furfural-residue, edible fungus dregs,and Chinese herbal medicine residue etc. All can be used as raw material.

Straw crusher image:

Character of pellets  

1 pelelts is a kind of new-style energy with renewable, environmental protection, high efficiency and low cost.

2 It is widely used of heating, hotels, restaurants, bath in industries as heat source, solved the problem of the coal boiler environmental pollution as well as the higher costs of industry fuel .

3 The pellets can replace coal. For the advantage of their great density,the pellets have much more calorific value than the same quantity of firewood. They can be used instead of coal or wood in domestic solid-fuel stoves as well as in industrial furnaces.

Our Company advantage in this field:

1.Long history in wood pellet machine and biofuel briquette machine making,has export to more than 20 countries.

2.Our product with high automation which can save labor,and it is also easy to maintenance ,save a lot of maintenance time.

3.Our machine is flat location stainless steel ring die mold and gear,which is different from Vertical location ring die machine ,which has a good performance.

Complete production line

1.Crushing process:

Wood crusher which can crushed the raw material into sawdust shape ,under 6mm,which is suitable for the dryer and pellet machine.It can crush straw,stalk,tree branches,nutshell,wood shavings,wood waste board,leaves,palm fiber ,etc.

2.Dring process

Air flash wood dryer or drum wood dryer which can dry the material under the moisture of 8%,which is suitable for pellet forming.The dryer use hot air accompany with material and evaporated rapidly .

3.Wood pellet mill:

Wood pellet mill convert the biomass material into pellet ,the length can be customed.

4.Cooling process

You can use a cooling fan or cool it by nature about half or one hour

5.Packing and bagger:

After cooling the semi-automatic quantative packing machine can pack the pellet into bag with quantative weight.

Main Parameter for your reference:(mobile:15036078775)

Service Commitment

With strong technical force, sound management system, and first-class sense of quality, it is possible for our equipment to achieve maximum reducing of maintenance ratio during your machine operation. And we offer the service below:

1. you shall bear the expenses of round-trip air ticket and the cost of board and lodging, and you should also bear the wages of our technician for about $ 50 /day, generally speaking, it needs about 2 days to grasp all of the operation skill.
2. It is also ok for your workers to come to our factory to receive training, and you shall bear all the expenses of your workers.

When you send enquiry to us, please kindly let us know:

1. what is the product? and size?

2. what is the size of the final pellet?

More information, please feel free to contact us buy mobile: 0086-15036078775 

More parameter(for size 8-33mm)