new type wood working briquettes making line
USD $3,000 - $30,000 /Set
Min.Order:1 Set
Gongyi Hengyuan Industry&Trade Co., Ltd.
wood working briquettes making line
First step: crushing
If the raw materials is the wood chips, which size is bigger than 6mm, we need to crush them into sawdust,
we have two types crusher, wood crusher and hammer mill, the capacity is as following
Model | FSJ-5 | FSJ-6 |
Main power | 11KW | 15KW |
Rotary cutter diameter | 500mm | 50mm |
Crushing blade number | 4pieces | 4pieces |
Blade length | 220mm | 240mm |
Chippind blade number | 4pieces | 4pieces |
Main shaft speed | 2400r/min | 2400r/min |
Diameter of feed materials | dia<150mm | dia<180mm |
Output | 400-500kg/h | 600-800kg/h |
Size of output | <5mm | <5mm |
Weight | 400kg | 480kg |
Dimension(L*W*H) | 1.5x0.75x0.75m | 1.5x0.75x0.95m |
Feeding mouth | 200x170mm(L*W) | 250*220mm(L*W) |
Second step is to dry the raw materials, we have vertical and rotary dryer
Model | HGJ-4 | HGJ-6 | HGJ-7(rotary type) | HGJ-10(Rotary type) |
Capacity | 300-400kg/h | 400-500kg/h | 600-800kg/h | 900-1200kg/h |
Water evaporation quality | 60-80kg/h | 60-80kg/h | 180-220kg/h | 180-220kg/h |
Consumption of wood | 15-20kg/h | 15-20kg/h | 25-30kg/h | 25-30kg/h |
Working temperature in pipes | 150-180°C | 150-180°C | 150-180°C | 150-180°C |
Input moisture | 20-30% | 20%-30% | 30%-60% | 30%-60% |
Final drying | 8-14% | 8-14% | 8-14% | 8-14% |
Barel diameter | 400mm | 600mm | 700mm(rotary body) | 1000mm(rotary body) |
Third step is to making the briquettes
Model | ZBJ-1 | ZBJ-11 |
Power | 15kw | 18.5kw |
Heating power | 4.5 | 9kw |
Capacity | 150-200kg/h | 250-300kg/h |
Moisture of raw materials | 8-14% | 8-14% |
Density of briquettes | 1400kg/m³ | 1400kg/m³ |
Consumution of KW per hour | 15.6kw | 22kw |
Size of final products | round or hexagon,70mm | round or hexagon,70mm,75mm or 80mm |
Weight | 600kg | 700kg |
Size | 1.7x0.75x1.3m | 1.7x0.75x1.3m |
Heating tempareture | 300-330°C | 300-330°C |
The final step is to making the charcoal, our furnace type is the new model, when has no smoke and no pollution when it works
New model carbonization furnace | |
Main introduction | Capacity: get 3ton charcoal /24hours per set |
we could put 2ton raw materials per inner basket, the carbonizing time is 8hours per | |
baskets, so we will carbonize 6ton raw materials, and get 3ton charcoal. | |
Main structure: There has three inner baskets and main furnace per set,we also | |
match hoisting tools or crane for operating. | |
The furnace is our new design, also have the oil collecting tools | |
How to operate: We put the inner basket into main furnace by hoisting tools | |
or crane, after carbonizing 8hours, then take inner basket out, let it cool by nature | |
at the same time, we put another inner basket inside, this is the continuouse process |
We could have different match according to your requirements, welcome to visit our factory in ZhengZhou, HeNan Province,