Metal rebar cutter machine
Metal rebar cutter machine is applicable to ordinary carbon steel, hot rolled round steel and deformed steel bars.It also can cut flat steel,square steel and angle steel.
Advantages of metal rebar cutter machine
1.Small volume,the quality of light,compact structure,firm and reliable.
2.Good lubricating performance: Using box-type sealed structure, gear splash lubrication, a continuous operation can be more than a month with a refueling (Oil level is not lower than the oil standard calibration, make the machine always in good lubrication condition).
3.Function loss less: because of the lubrication condition improve, gear shaft end uses the rolling bearings, small resistance, compared with the same type cutting with load power can reduce a third.
Main technical parameters of metal rebar cutter machine
| GQ40 | GQ50 | GQ60 | ||
| cutting diameter | ordinary carbon steel | ≤Φ40mm | ≤Φ50mm | ≤Φ60mm |
| II deformed steel bar | ≤Φ32mm | ≤Φ40mm | ≤Φ50mm | |
| flat steel ( max specification of cutting ) | 70*15mm | 80*18mm | 90*20mm | |
square steel ( max specification of cutting) | 32*32mm | 40*40mm | 50*50mm | |
| angle steel ( max specification of cutting ) | 50*50mm | 63*63mm | ||
| Speed | 32times/min | 28times/min | 28times/min | |
| Power | 3kw-2pole | 4kw-2pole | 5.5kw | |
| Weight | 450KG | 500KG | 800KG | |
| Size | 1250*500*730mm | 1420*530*850mm | 1800*500*970mm | |
| Voltage | 380V | 380V | 380V | |
The pictures of metal rebar cutter machine
Main spare parts of metal rebar cutter machine
Packing:wood case
Shipping:we can also use CIF terms.
Welcome to our factory for visiting,we will pick up you at the airport.We can also send our engineer to your country for installing.We will try our best to provide service for you.
GongYi HengYuan Industry Co., Ltd is located in GongYi, ZhengZhou, HeNan Province—China
1)Agriculture machines (charcoal briquettes series machinery, crusher, dryer and so on)
Q : What's the main advantage of Manual steel bar cutting machine ?
A: 1. Enhanced machine rack, small volume, compact structure, solid and reliable.
2. Good lubricating property, adopt enclosed gear box, use the gear splashing to realize lubrication. It can work constantly for two months after adding 8kg gear oil.
3. Little power consumption because of the lubrication improvement. The gear section adopts rolling bearing, less resistance . Compared with same type cutting machine, load power can be reduced by one third.
4. Using high rigid cutting head, connecting rod and high speed national standard motor, guarantees more stable quality and longer service life.
Q : What's the main Usage ?
A : Cut all steel material, like ordinary carbon steel, cold & hot round steel, screwed thread steel,flat/angle/square/scrap/deformed steel
Q: What's the mainly applied ?
A: Manual steel bar cutting machine mainly applied to buildings, Bridges, tunnels, power stations
large-scale water conservancy projects for steel fixed length cut off.