HT producer directly sales Anthracite Filter Media For Water Treatment
USD $198 - $320 /Ton
Min.Order:1 Ton
Wen County Hongtai Water Treatment Materials Factory
Anthracite Filter Media For Water Treatment
Our company produces anthracite filter media, using high-quality incense, Shanxi carbon as raw materials. After carefully selected, crushing, screening and other craft processed. It is particle uniformity, gloss, good abrasion resistance and high mechanical strength and the use of a long cycle. It applies to the general acidic water, neutral water, alkaline water purification treatment. Which is a double-filter, three filters water purification materials indispensably, and the technical indicators have reached and exceeded the Ministry of Construction (CJ/T44-1999) standard.
Anthracite filter material is special mineral selected from a deep well, with the carbon content of the highest percentage. Anthracite filter material using artificial classification, can reduce irrelevant minerals and lower ash content. After filtering and washing. Anthracite filter material is special mineral selected from a deep well, with the carbon content of the highest percentage. Water filter material using artificial classification, can reduce irrelevant minerals and lower ash content. By water filter material of filtering and washing, make sure it's suitable for water filtration. Because has better ability in solids maintain, anthracite can be reliably improve suspended particle removal ability. In addition, its uniformity coefficient is low, help to accelerate the velocity.
Anthracite Application :
Anthracite coal and quartz sand filter material used is the promotion of double quick filter and three layers of the best material to filter , cartridge filter. Increase the water yield per unit area is to improve the filtering speed and multiply section carrying capacity, reduce the project cost and the most effective way to reduce cover an area of an area. Widely used in chemical industry, metallurgy, thermal power, pharmacy, paper making, printing and dyeing, food, etc. In the process of the production water quality before and after treatment.
Anthracite Physical and chemical properties analysis:
Physical properties | Chemical properties | ||||
Item | Units | Data | Item | Units | Data |
Proportion | g/cm3 | 1.5 | C | % | >80 |
Bulk density | g/cm3 | 0.947 | Pb | % | 0.045 |
Breakage | % | ≤0.80 | Cu | % | 0.028 |
Porosity | % | 47-53 | Zn | % | 0.04 |
Wear rate | % | ≤0.55 | S | % | 0.05 |
Hydrochloric acid soluble rate | % | ≤1.28 | Other heavy metals did not exceed the national drinking water standards | ||
Non-uniform coefficient | k80 | 1.8-2.0 | |||
Mohs Strength |
| 3.2-3.8 | |||
Dust rate | % | ≤2 |
Common Specifications: 0.6-1 .2 mm, 0.8-1.8mm,1-2mm,3-6mm, 4-8mm or according your requirement.