Hot sale high quality fiber ball filter media for water treatment/fiber ball stuffing diameter 12-50mm
USD $440 - $508 /Cubic Meter
Min.Order:1 Cubic Meter
Wen County Hongtai Water Treatment Materials Factory
Hot sale high quality fiber ball filter media for water treatment/fiber ball stuffing diameter 12-50mm
1.Product introduction
The Fiber ball stuffing becomes by the fiber ligation, it filters the mateial with the traditional steel pellet to be different, has the elastic effect to be good,does not surface the boat the water surface, the percentage of voids major characteristic.In the filtration process, the filter bed crevice changes gradually along the fluent direction is small,compared with tallies filters the material big porosity distribution rule ideally, has the efficiency to be high, the rate of percolation quick(20-50m/h) the truncation dirty capacity is big, the filtration effect is good, renewable, the use ost is low, is adapts in each water quality, the oil field oily sewage fine filtration, is also suitable for the other industrial fine filtration.
2.Performance of Fiber ball stuffing
Fiber ball, can be easily removed precipitation tiny suspended interception. Traditional sand filter speed liao liao, 3.5 times higher can backwashing regeneration, may realize the automatic
The general administration, 30, thick/h/l, 100mg water filter water SS acuities 5mg/l, fine filtration feed water 20mg/l, 2mg acuities/l. Widely used in oil field
Industry, chemical industry, electric power, metallurgy industries such as high water, Beside the circulation, filtration and wastewater recycling. (a), performance and characteristics: this product selection
Dacron high dimension of aldehydes, terylene? For raw materials. With its own surface of biological mass with attached with oxygen, sewage and waste of material, make contact
And the organic matter degradation and processing. It features: 1. Qualitative light, intensity tall, physical and chemical stability and durability. 2 with water
3.Fiber ball stuffing technical specifications
Analyze project | Test data | Analyze project | Test data |
density | 1.38g/ cm3 | Filling density | 75-90 kg/ m3 |
Filtration speed | 20-85m/h | Surface | 3000m2/ m3 |
Cut the dirt ability | 6-10kg/ m3 | Porosity | 96% |
Ball diameter | 25mm,30mm | Ball appearance | White oblong-elliptic |
4.Picture of the Fiber ball stuffing
OUR CERTIFICATION :