Competitive Price Coal Based Activated Carbon
USD $410 - $500 /Ton
Min.Order:20 Tons
Wen County Hongtai Water Treatment Materials Factory
Hongtai calcined carburant/graphite section carburant and graphite carburant
Caustic soda flake 99%,very oringiner of the goods manufacturer
Caustic soda flake 99%,most of the caustic soda products are produced and send our from our factory
Caustic soda flake 96%,most of the caustic soda products are produced and send our from our factory
Wenxian hongtai Carburant
♣Product Breif introduction
With carburant joined can effectively improve the content of carbon in liquid iron, so the fixed carbon content of carburizing agent must not be too lowcompared with the addition of high carbon carburizing agent more samples need, this will increase other adverse element carbon agent the amount of the molten iron, unable to obtain better returns.
Sulfur, nitrogen, hydrogen element low is crucial to prevent produce nitrogen porosity of castings, which requires carburant nitrogen content as low as possible.
A carbon content of high black or grey particles ( or block ) coke follow-up product, added to the metal smelting furnace, increasing the carbon content of molten iron, one can reduce the oxygen content of molten iron, on the other hand, more important is to improve the mechanical properties of metal smelting or casting.
Many sources, carburant shapes, according to its processing technology and components of different, the price difference is very great. Smelting method similar to conventional Cupola Melting: the use of pig iron, scrap, steel scrap, iron alloy such as metal charge; synthetic cast iron production process: the use of new scrap charge, using carbon to carbon equivalent adjustment of molten iron. After a mode of production is easy to ensure high quality iron liquid, at the same time by using less or replace to greatly reduce the cost of pig iron scrap. Popular to say, by carbon agent, we can use the worst ( scrap ) make the best ( casting).
Detailed usage
CARBURANT FOR ductile iron
1.1. TDW ™ CARBURANT
Not only meet your requirement on carbon content but also control the sulfur content effectively. It makes the micro morphology of sulfur in the casting is A form graphite. Get fire and uniform graphite; promote the process of nodulization and inodulization. Improve iron-graphite system and reduce the ferrite graphite.in addition, the carburant control the sulfur by the high carbon, it can be absorbed wonderfully and no anti-slag, thus reduce cost and lower smelting time save the energy consumption.
1.2 Usual specifications
Fixed Carbon | Sulfur | Moisture | Volatile | Graininess |
|
≥ | ≤ | ≤ | ≤ | 90% |
|
Carb-QT-99A | 99.50% | 0.03% | 0.50% | 0.50% | Custom |
Carb-QT-99B | 99.00% | 0.03% | 0.50% | 0.50% | Custom |
Carb-QT-98 | 98.50% | 0.05% | 0.50% | 0.50% | Custom |
Carb-QT-92 | 92.00% | 0.30% | 1.50% | 2.00% | Custom |
1.30 Benefits: reduce the cost and improve the quality of products
2.00 features:
2.11 Pure chemical composition: high carbon, low sulfur and micro nitrogen, less impurity.
2.12 Physique: Clean appearance without impurities, fast absorption rate and high absorptivity.
2.13 Micro morphology: good Crystal quality and improve the performance and specification of casting
2.14: Stable property: stable carburetion effect, good absorption effect and Increase melt temperature distinctly without back slag.
3.0 size and packing
3.1 size
Grade A: 0-1mm,0.5-1.5mm etc.
Grade b: 1-3mm,0-5mm,1-5mm,3-5mm,3-8mm etc.
Grade c: 30-50mm, 50-80mm,60-100mm etc.
3.11Applications
Due to different melting technology and equipment, grade A is applicable to iron liquid carburetion with flow before the furnace(cupola and electric furnace) and later supplementary carbon in the furnace(electric furnace).Grade B is applicable to carburant in the
Induction Furnace .grade c is only applicable to smelting in the cupola furnace.
3.12 The size can be In accordance with the requirement of the customers.
3.20 packaging
25kg/bag Waterproof woven bag
25kg/bag double paper bags
50kg/bag woven bag
1000kg/bag ton bag
If any special instruction, please contact with us.
3.30 mark
Please remember the sign of “TDW” and “CMMC”.
3.40storage:
Please keep the storage clean and dry, prevent moisture and dirty.
4.00 Quality guarantee and technical support
4.1provide the quality guarantee with the goods including: company name, address, product name, date of manufacture type and model, result of test.
4.2 Ensure to offer on-site technical service and support.