Specifications

knitted wire mesh
1.Number of machine needles.
2.first opening is that between two needles.
3.Weight of 1m linear m of fl

Knitted wire mesh 

The table shows a wide range of Knitted Wire Mesh whose characteristics meet the most frequent use applications.
A:It is the standard width of mesh going out of the machine, once flattened(flattened pipe).
B:It is the maximum width the machine can deliver.
C:It is the minimum width the machine can deliver

D:Number of machine needles.
F:Mesh opening. Also included in the nominal width. Two mesh openings machines.
The first opening is that between two needles.
The second is that of the hole of the needle itself,i,e., there is one opening of each alternatively.
G:Weight of 1m linear m of flat mesh, in grammes, 0.26mm wire, AISL 304, mesh at rest not drawn, if the wire diamerter is different the weight of mest is proportional with the wire section(*).Make the conversion according to the spectific weight of each material for the different qualities.
(*) Section in the sense of the area

 

 

A	B	C	D	F	G
60	60	55	36	2x4	54.24
120	15	100	34	4.5x4 2.5x4	65.54
140	150	120	40	4.5x5.5 2.5x5.5	65
200	205	180	56	4x3.5 2.5x3.5	105.4
250	260	240	65	4x4 3x4	123.22
410	420	380	94	5.2x3.5 3x3.5	198
560	565	490	102	7.5x5 X@5	195.16
560	560	470	128	5x4 2.5x4	270