The fume hood introduction

Our company is the professional producer of FRP products. In recent years according to some manufacture, and the scientific research medical service we designed and developed glass fiber reinforced plastic furniture serial products and so on. Such as laboratory, medicine room, and the glass fiber reinforced plastic fume hood, the combined glass fiber reinforced plastic laboratory bench, and the glass fiber reinforced plastic drugs fume hood and necessary drugs and so on. It uses the synthetic resin is the cementing agent, the glass fiber to strengthen the material, becomes according to a certain proportion synthesis method processing. Has bears the chemical etching, thermostablly, water resistant, to bear the climate, the electric insulation performance to be good, the intensity is high, weight characteristics and so on light, sound-insulated ant vibration. It’s popular with the user.

Ordering notice  

1 the fume hood should write completely, If the table material cannot satisfy the request, may product according to the user request.

2 the fume hood body color is a cream color generally, if the user has the request in addition, may mix colors according to the user’s request.

3 fume hood fitting quantities may add or deduct according to the user request.

4 fume hoods pour water, pipeline positions and so on electricity, gas, only satisfies the general laboratory request. If the user has special request, should proposed at the beginning of the ordering.

5 If the user has the request about combined type laboratory bench length, should propose the assembling plan and the request according to the modulus size.

6, laboratory bench body ordinary is the cream color; the floor is a black, if the user has the request to the color, must order when proposed.

TF-A12/15

The amount of discharge wind: 700-1500m3/h

Operating hole wind speed: 0.3-0.7m/s

Resistance: 5-12mmH₂O

Operating hole size TF-A12 900×900 TF-A15 1200×900

external size TF-A12 1200×800×2350 TF-A15 1500×800×2350

Gate opening form High and low on rollers

Illumination 20W daylight lamp

Structural style: Split type

TF-B12

The amount of discharge wind 7001500m3/h

Operate hole wind speed 0.30.7m/s

Resistance 512mmH2O

Operate hole size TF-A12 900×900 TF-A15 1200×900

external size TF-A12 1200×800×2350 TF-A15 1500×800×2350

Gate opening form High and low on rollers

illumination 20W daylight lamp

Structural style: Split type

TF-C15

The amount of discharge wind 7001500m3/h

Operate hole wind speed 0.30.7m/s

Resistance 512mmH2O

Operate hole size TF-A12 900×900 TF-A15 1200×900

external size TF-A12 1200×800×2350 TF-A15 1500×800×2350

Gate opening form High and low on rollers

Illumination 20W daylight lamp

Structural style: Split type

TF-E12/15

The amount of discharge wind10801400 m3/h

Operate hole wind speed 0.30.7m/s

Resistance 512mmH2O

Operate hole size1200×1000(E12) 1500×1000(E15) mm

external size (A×B×H) 1200×750×2350(E12) 1500×750×2350(E15)mm

BTF-A12/15

The amount of discharge wind 6901830(A12) m3/h 8802350(A15) m3/h

Operate hole wind speed 0.3-0.8m/s

Resistance 512mmH2O

Operate hole size1200×1000(A12) 1500×1000(A15) mm

external size (A×B×H) 1200×750×2550(E12) 1500×750×2550(E15)mm

BTF-B12

The amount of discharge wind 7001500(A12) m3/h

Operate hole wind speed 0.30.7m/s

Resistance 512mmH2O

Operate hole size1050×650mm  

Gate opening form High and low on rollers

Illumination 30W daylight lamp