1. Poultry farm design -- provide the best guide and service for your chicken farm buliding;

2. Equipment installation -- we can send our engineers to your location for installation guidance;

3. Workers training--we can train your workers to run our equipments, to make sure no-risk farming;

4. After-sale service--prompt reply for any questions from our clients.

1. Chain Feed Line System(Female breeders):

2. Pan Feed Line System:

Driving motor:

(Taiwan motor with overload protection of IP55 grade)

Power: 0.75kw

Voltage: 380V/220V/customerized

Frequency:50hz, three phase/single-phase, AC current.

Feed hopper:

Bin Volume: 115L,200L

Material: Hot-dip galvanized sheet

Material Thickness: 1mm

Pan feeding system:

Conveying pipe: 4 pans/3m, 3 pans/3m

Diameter: 45mm

Feed Pipe Material: Hot-dip galvanized steel pipe(the zinc coating amount is more than 275g/m2).

Thickness: 1.2mm

Spring auger: imported from South Africa

Feeding ability: 400kg/h.

Feed sensor:

When feed sensor is installed inside the feed pan(coonect to open), driving motor starts work to convey feed,

when feeder sensor does not touch feed, and it stops conveying feed when feed sensor touches feed( for main feed

line and pan feed line use).

When feed sensor is installed at the bottom of feed bin(connect to close), the function is opossite to the above situation.

Female breeders feed pan:

The main characteristics of our female breeder feed pan:

1). 4pans/3m, feed pan distance :750mm;

2). Feed pan diameter: 360mm;

3). Material:pp---Polypropylene;

4). Feeding capacity: 12.5 birds/pan;

5). 16 grills width of 40-52mm divide into 11 files, suitable for all stages breeders (including day-old birds) feeding needs;

6). Feed hole height of 70mm,80mm,90mm three files. when feed hole width is 52mm, height is 80mm, chicks can in&out

freely;

7). Feed pan capaicty: 16 grades files, 200-630g/pan, which can meet different stages chickens eating demands;

8). Pull switch design, easy to switch each pan;

9). Bottom of the pan can be hanged, easy to take down, convenient to install and wash.

Male breeders feeder pan:

The main characteristics of our male breeder feed pan:

1). 4pans/3m, feed pan distance :750mm;

2). Feed pan diameter: 360mm;

3). Material:pp---Polypropylene;

4). Feeding capacity: 8-9 birds/pan;

5). With 9 grilles design, there are still intake hole after supplementing male breeders.

6). The fixation clamp can prevent feed pan swinging, so as to keep feed at the center of feed pan.

7). The adjusting ring at the top of feed pan can adjust the feed gears to the optumum position to reduce the waste of feed. 

3. Nipple Drink Line System:

Nipples&drip cups&square water pipe:

1). Outside shell is made of pure engineering plastic, inner valve rod is made of stainless steel.

2). Feeding capability: 8-10 birds/drinker.

3). All nipples are anti-rusting, service life over 10 years.

4). Double-sealing structure, with good seal ability, avoid water leakage and its bad influence to chicken farm.

5). Valve rod is movable in 360 degree, it's suitable for all breeders to drink, from day-old chicks to adult chickens.

Pressure regulator( double barreled with large flow capacity)

1). Good regulating stability, high switching performance.

2). Sufficient water supply.

3). Recoil cleaning with good cleaning result, save time& water.

4). Good quality movable valve, easy to change

Waterline front system:

Front part is controller of water, it's main function is to adjust water supply pressure and stabilizing drinking volume.

This part is usually installed in control room.

1). Pressure regulator: make sure to supply stable water to drinking line. Anti-backlash device can discharge the

impurity in pipe.

2). Filter: clean water and avoid blocking nipples.

3). Water meter: measure water usage volume.

4). Doser: add medicine exactly to prevent disease.

Lifting& suspension system:

Correct height for drinking system is very important for chicken( both higher and lower can result chicken bone's

distortion, which is bad for chicken growth, also lead to water waste), it's easy to adjust drinking line height by winch.

Water display level tube:

Use high transparency& impact resistant meterial, it's sturdy and durable, easy to watch water level, easy to take down

and clean with this advanced design.

Click to learn other systems for breeder poultry house: