358 high security galvanized anti-cut anti-climb fencing manufacture

Panels

• The panels are 2515mm wide & heights range from 1200 mm to 6000mm
• Mesh sizes are 76.2 x 12.7mm & manufactured from 4mm wires
• Weld strength 75% of the minimum tensile strength of the wire
• Toe & fingerproof mesh aperture
• An anticlimb & anticut fence with excellent through visibility and resistance to vandalism

Coating

• Panels are manufactured from pre-galvanised wires
• An adhesion coating is applied to allow perfect adhesion with the polyester coating
• Posts are polyester coated with a galvanized substrate

Colours

• Supplied in Green RAL6005 and Black RAL9005 as standard but other colours are available on request 

Mesh sizes and tolerances

•  Distance between the centres of horizontal wires (cross wires): 12.7 ± 1 mm
  Variations in mesh dimensions shall be maximum ± 1.5 mm per 1 meter length.
  Distance between cross wire centres over 5.8 m length (max. cumulated
  tolerance: ± 6mm)
• Distance between the centres of vertical wires (line wires): 76.2 ± 2 mm
  The variations in the mesh dimensions shall be not more than ± 3 mm over total
  width of panel 

Type-1

Type-2

Post Size

Size: 60 x 60, 80 x 80, 60 x 80, 60 x 120mm, etc.

Thickness: 2.0, 2.5, 3.0mm

Height:  2800, 3100, 3800mm

Surface Treatment: Hot dipped Galvanized or Powder Coating

The posts are polyester powder coated with a galvanised substrate in the accordance with 

Euro norm10147 (min. 60 micron)

                                                                                                                                                                           Get more + price 

Fence Panel 

1> There is a piece of plastic film(with small bubbles), The first panel can be prevented from damaging the metal pallet

2>Metal plate is fixed at each corner of the panels, which can keep the panels stay together and immovable.

3> there is plastic film between two fence panels , which will prevent the friction and collision of each fence panel .

4> The wood plate on the panels can prevent the last panel from being damaged by top pallet

Pole

the pole with a cap is covered by plastic film ,then packaged by metal pallet

Accessories :

Clips and Screw&nuts are filled into the plastic bag ,then put them into the carton box

Anping County A.S.O Metal Wire Mesh  Products Co., Ltd.is located in Anping Town, “the Hometown

of Wire Mesh”, also known as“the Production and Distribution Base of Wire Mesh”. Founded in 1998,

we have our own factody covering 67000 square meters with workshops , We have passed ISO9001

Certificate and CE Certificate,

Dont hesitate to send a inquiry to Alisa to get a price and more info !