Specifications

Q235 low-carbon steel wire welded,evenly mesh surface, firm welding point,strengthen the heat insulation material

                                                     floor heating mesh manufacturer

Welded Floor Heating Mesh is specially designed for floor heating reinforcement.This kind of welded wire sheets are mainly used for installation & fixing of heating pipes or cables,strengthening heat isolation sheet materials and/ or increasing the load-bearing of the surface floor.

1.easy for the installation of the pipe materials. fast to construct, fix the pipe materials

    on the steel wire mesh

2 strengthen the loading strength of the house.prevent the floor surface from cracking

   and collapsing

3. the steel wire mesh has good thermal conductivity and can promote uniform cooling

    of the hot.

4. The most important point is that the insulation cracking, steel wire mesh in the

     construction work is a kind of insulation

    ripstop material construction effect is very good, trust has always been in the  

     construction industry

common specification:

                                 wire diameter:2mm

                                 mesh hole:     10cm*10cm

                                 length*width:1m*2m

 the floor heating project all use the mesh of 1*2m.and the mesh hole ranges from 5cm    to 30cm

diamer of the wire: 1.5-4mm   The thickness of the wire diameter determines the quality of the project and the carrying capacity of the ground(as the specific need of the project) 

specification:

specification	wire diameter(MM)	mesh hole(CM)	net weight(KG)
1M×2M	2.00	10×10	1.06
1M×2M	2.00	15×15	0.67
1M×2M	2.00	20×20	0.56
1M×2M	2.50	10×10	1.65
1M×2M	2.50	15×15	1.04
1M×2M	2.50	20×20	0.88
1M×2M	3.00	10×10	2.38
1M×2M	3.00	15×15	1.5
1M×2M	3.00	20×20	1.27