Specifications

The tractor can be equipped with power steering, 2 stage clutch, creeper gear, roll bar and canopy tyre for different request.

Main Technical Date of ADM250 Tractor:

A. General Specifications:

Type: 4X2 two-wheel driving,25hp.

Rated traction force(KN):                                        5.88/5.49

P.T.O max power(KW):                                          16.1

Dimensions(mm):                                               3090×1340×1940

Spread of axles(mm):                                            1700

Spread of front wheel(mm):                                       1100-1500(adjustable)

Spread of rear wheel(mm):                                        1100(adjustable)

Minimum ground clearance(mm):                                   475

Minimun turning radius(mm):                                      2800 + 200

Structural weight(kg):                                            1210

Gear forward / Back forward:                                      6/2

Speed range forward(km/h):                                       1.66-21.2

Speed range backword(km/h):                                     1.55-6.06

Tire specifications of Front-wheel / Rear-wheel:                       4.0-16/9.5-24

B. Engine:

  Model:                                                       FD295T

  Type:                   Inline, water-cooling, four stroke, direct injection combustion chamber.

  Bore × Stroke(mm):                                             95 × 115

  Power(kw):                                                   17.6(25PS)

  Rev.(r/min.):                                                  2000

  Max. torque(N.M):                                             96.9

  Speed of Max. torque (r.p.m.):                                    1400

  Fuel consumption(g/kw.h):                                       258.4

  Lubricating method:                                        Pressure and splash lubricating.

  Cooling method:                                         Forced circulating water cooling.

C. Working device:

  Lifter Tilling depth control:                                 Draft and positional adjustment.

  Max. lifting capacity:                                      3.97

  Suspension type:                                          Three-point, I category.

  Power output shaft type:                                    Back-built, non-independent

  Speed of P.T.O.(r/min.):    540-750 540-1000 750-1000 Random selection of three configurations.