Agricultural Irrigation HDPE double-wall corrugated pipe
USD $10.95 - $65.69 /Meter
Min.Order:1000 Meters
Hebei Jinshi Industrial Metal Co., Ltd.
SN4 Drainage White PVC double wall corrugated pipe
UPVC double wall corrugated pipe
Agricultural Irrigation HDPE double-wall corrugated pipe
Material:HDPE,PVC,UPVC
Use,drainage,sewage,etc
Standard: GB/T 19472.1-2004
ISO9001:2008
Application:
Water Supply System
1. Transportation and distribution system
2. House service connection
3. Geo-thermal pipe for room heating & hot water system
Industrial
1. For Effluents, chemicals and treated/untreated waster disposal
2. As Hydro Transport System for handling and conveyance iron ore slurry, - coal / cement slurry and slurry transportation in mines
3. For conveyance of edible oil, fruit pulps, juices, milks and other food materials.
4. As ducts for ventilation and air conditioning
Environmental Protection
1. Rehabilitation of existing sewer
2. Effluent and waste treatment plant pipes
3. Dust suppression piping systems in cement industry
4. Sand slurry disposal pipes in dredging
5. De-gassing pipes in water effluent marine outfalls
Agriculture
1. Piping for submersible and jet pumps
2. Suction and delivery pipes
3. Sprinkler piping for irrigation
Other
1. Transportation of chemicals, solids, gas and oils
2. Underwater pipelines. / Desalination plants
3. Bore wall delivery lines
4. Telecommunication cable ducting
Applies to rain water drainage, sewage drainage in residential district, or pollutant and exhaust gas discharge as well as sewage drainage for mine industry, or organic pollutants drainage from
people's life, agricultural drainage, low pressure irrigation and coalmine ventilation.
Nominal Inner Diameter(DN/ID)(mm) | Average Outer Diameter(mm) | Virtual Length (mm every piece) |
225 | 256 | 6000 |
300 | 346 | 6000 |
400 | 464 | 6000 |
500 | 575 | 6000 |
600 | 697 | 6000 |
700 | 789 | 6000 |
800 | 932 | 6000 |
1000 | 1150 | 6000 |
Items | Technical index |
Hoop Stress(SN4) Hoop Stree(SN8) | ≥4 KN/m2 ≥8 KN/m2 |
Ring Rigidity(Ring Elasticity)
| Test sample should be smooth, without reversed flexure, breakage and divided on pipe wall. |
Impact Strength | TIR≤10% |
Flattening Test | no crack |
Creep Ratio | ≤4 |
Contact, Ms. Serena
Skype, serena-wiremesh
Mob, 086 133 1598 1839
Picture reference