Specifications

Polypropylene, PP Granules, PP resin, PP raw material
Impact block copolymer
Injection molding, fiber, yarn.

Virgin & Recycled PP

1 Grade:
PP block copolymer: : Injection moulding, PP block copolymer: : Pipe extrusion, PP block copolymer: : Sheet extrusion, PP block copolymer FLOWPACT: : Injection moulding, PP controlled morphology CLEARPACT: : Injection moulding, PP controlled morphology CLEARPACT: : Thermoforming, PP high crystallinity: : Automotive injection moulding, PP homopolymer: : Bi-axially oriented film, PP homopolymer: : Cast film, PP homopolymer: : Fibre, filament and tape extrusion, PP homopolymer: : Healthcare, PP homopolymer: : Injection moulding, PP homopolymer: : Pipe extrusion, PP homopolymer: : Thermoforming, PP Homopolymer FLOWPACT: : Injection moulding, PP impact: : Automotive injection moulding, PP random: : Automotive injection moulding, PP random copolymer: : Blow moulding, PP random copolymer: : Cast film, PP random copolymer: : Healthcare, PP random copolymer: : Injection moulding, PP random copolymer: : Sheet extrusion, PP random copolymer QRYSTAL: : Injection moulding, PP super high impact: : Automotive injection moulding

2 Application:
Exterior application, Houseware & appliances, Caps & closures, Crates & boxes, Thin wall packaging, Bottles & cans, Cast PP film, Under the bonnet application, Thin wall packaging, woven bag, BOPP film, Sheet Sewage Waste water pipe, Tapes & strapping, Containers & pails
Properties Unit Test method Value
Melt Flow Rate
Melt flow rate(230°C/2.16KG) g/10min ISO 1133 12
Mechnical Properties
Tensile modulus of elasticity(v=1mm/min) Mpa ISO 527-2 1550
Tensile yield at stress(v=50mm/min) Mpa ISO 527-2 35
Tensile yield at strain (v=50mm/min) % ISO 527-2 8
Tensile strain at break (v=50mm/min) % ISO 527-2 >50
Charpy impact strength unnotched(+23°C) kJ/m2 ISO 179/1eU 110
Charpy impact strength notched(+23°C) kJ/m2 ISO 179/1eA 3.0
Izod Impact strength notenched(+23°C) kJ/m2 ISO 180/1A 3
Ball indentation hardness(H 358/30) Mpa ISO 2039-1 78
Thermal Properties
Melting point,DSC °C ISO 3146 163
Heat deflection temperature (0.45Mpa) °C ISO 75-2 85
Vicat softening temperature VST/A50(10N) °C ISO 306 154
Other Properties
Density g/cm3 ISO 1183 0.91