Specifications

Raymond mill has less investment ,low energy consumption and high productivity.We have many models to meet your capacity need.

Wooden case or container as your demand  

Raymond Mill Working principle:
The whole grinder is collocated with jaw crusher, elevator, hopper, electromagnetic vibrating feeder, main unit, classifier, collector, cloth deduster and high-pressure blower.
The working principle is as follows: load the stuff for grinding evenly and continuously into the grinding chamber of the main frame. Due to the centrifugal force in rotation, the roller swings go outward and presses closely upon the ring. The shovel carries the stuff to the space between the roller and ring. When the roller rolls, the stuff is thus grinded.
After being grinded, the stuff is to be routed to the classifier along wind belt of the blower and the rough powder will be put back to the grinder for regrinding.
The fine powder flows into the cyclone collector together with air flow and is expelled from the powder output pipe as product.
In the grinding chamber, since the stuff contains moisture to some extent, the heat generated during grinding makes the moisture evaporate; since the pipeline joints are not airtight, the external air is sucked in and the circulation air mass increases. In order to enable the grinder to work in negative pressure, the increased air flow is guided to the deuster and sequentially to the atmosphere after purification

.

Type	Roller			Ring		Max.Stuff size(mm)	Fineness of product(mm)	power for Machine(kw)
	NO	DIMENSION(mm)	HEIGHT(mm)	INSIDE DIAMETER	HEIGHT(mm)
3R2115	3	210	150	630	150	15	0.44-0.165	15
3R2615	3	260	150	780	150	15-20	0.44-0.165	18.5
3R2715	3	270	150	830	150	15-20	0.44-0.165	22
3R3016	3	300	160	880	160	15-20	0.44-0.165	30
4R3216	4	320	160	970	160	20-25	0.44-0.165	37