pvc additive TBC replacement Epoxy Fatty Acid Methyl Ester S-03 additives for polyvinyl chloride (pvc)
USD $1,108 - $1,239 /Metric Ton
Min.Order:1 Metric Ton
Hebei Jingu Plasticizer Co., Ltd.
Plasticizer dop doa dbp DOTP substitution Epoxy Fatty Acid Methyl Ester
DBP replacement Epoxy Fatty Acid Methyl Ester plasticizer-replace dinch
pvc additive Flash point Epoxidized Soybean Oil Z-10 epoxy oil
plastificante dop manufacturer pvc intermediate Fatty Acid Methyl Ester for producing EFAME
pvc additive Epoxy Fatty Acid Methyl Ester used for pvc products S-03 epoxy oil
plastificante dop DINP substitution Epoxy Fatty Acid Methyl Ester S-01
pvc additive
Application:
To make sure of good quality and reduce the production cost for the middle and
low-end PVC products,we developed Epoxy Fatty Acid Methyl Ester S-03,
which can be used for the production of car floor, advertising cloth, electric wire,
cable and recycled plastic granules, etc.
With the low pricing, it can reduce the production cost of PVC products.
Product Features:
1.Epoxy Value:
With the higher epoxy value 4.5, Epoxy Fatty Acid Methyl Ester S-03
is your first choice for manufacturing ordinary plastic products in the similar products.
It enjoys good compatibility with PVC resin, low vaporization and good stability to the
light and heat.
It can increase the flexibility and enhance the cold/ heat resistance of PVC products.
2.No odor:
Through the long-time technological improvements,
now our product epoxy fatty acid methyl ester has no odor.
3.Color: The color is yellowish and the APHA is about 55-65.
4.Flash Point: The flash point of Epoxy Fatty Acid Methyl Ester No.3 is 180°C.
Products Index:
Item | Standard | Result |
Epoxy value(%) | ≥4.0 | 4.5 |
Moisture(%) | ≤0.5 | 0.05 |
Acid Value(mgKOH/g) | ≤1 | 0.36 |
Color(APHA) | ≤100 | 55-65 |
Iodine Value(g/150g) | ≤5 | 4.07 |
Flash Point(°C) | >170 | 180 |
Density(e20°C/) | 0.94-0.96 | 0.94 |
Odor | NO | NO |
Condensation Point(°C) | 8 | 5 |