Name: MBR Technology In Water Treatment for Water Reuse
Brand: Benenv
Availability: InStock

Product Details

MBR Technology In Water Treatment for Water Reuse

Introduction

The Membrane Bioreactor MBR is a combined technology of activated sludge process and membrane solid-liquid separation process. BENENV design and manufacture compact grey water treatment equipment membrane system of package plant. BENENV design MBR technology in water treatment for Water Reuse.

Parameters

Membrane Bioreactor MBR sheet (pcs.)

Parameters	BN90	BN150
Effective membrane area (m²)	0.9	1.5
Overall size(LBH)(mm)	10305106	16505106
Membrane pore size(μm)	0.2~0.4
Membrane material	PTFE/PVDF
Water yield (L/pcs·day)	450~630	750~1050
Effluent turbidity (NTU)	<1.0
Suspended solids in effluent (SS,mg/L)	<1.0

Model (All customized models are available by online inquiry)

Parameters	BN90-100	BN90-150	BN150-100	BN150-150
Number of membrane elements (pcs.)	100	150	100	150
Effective membrane area (m²)	90	135	150	225
Treatment capacity (m³/d)	45	67.5	75	112.5
Aeration capacity(m³/min)	1~1.2	1.5~1.8	1.5~2	2.25~3
Frame material	Stainless steel 304
Diffuser pipe material	Stainless steel 304/UPVC/ABS
Collection pipe material	UPVC

Advantages

Easy to clean
High efficiency / Low maintenance
Membrane modules are back flushable
Yield 60-80% less sludge than conventional system
Compact design – footprint 75% smaller than conventional
Possibility of direct and indirect water reuse

Application

FAQ

1. [Q]How to buy my ideal products?

[A] Provide us with details about your water sources, water quality, flow rate and ground area, we will analyze for you and recommend you the best water treatment solution.

2. [Q]How to change the membrane sheet?

[A]Due to unique design of the flat membrane module, flat membrane can be replaced one sheet for one time, without changing support.

3. [Q]How to clean/wash the membrane sheet?

[A]You can clean the membrane cartridges in-situ: stop the blower and switch valves, pour the chemical for 10 minutes, keep intact for a few hours.

4. [Q]How often should the membrane be washed?

[A]Usually chemical cleaning should be carried out every half a year.

5. [Q]How to install after the equipment arriving destination?

[A]We will provide detailed illustrations to you. If necessary, we will send technicians to help you.

Why choose us?

Our clients

BENENV has clients in over 37 countries!