Name: PTFE/PVDF MBR Membrane Sewage Water Treatment for Water Reuse
Brand: Benenv
Availability: InStock

Product Details

PTFE/PVDF MBR Membrane Sewage Water Treatment for Water Reuse

Introduction

The Membrane Bioreactor MBR is a combined technology of activated sludge process and membrane solid-liquid separation process. BENENV design and manufacture PTFE/PVDF MBR membrane sewage water treatment for water reuse.

Parameters

Membrane Bioreactor MBR sheet (pcs.)

Parameters	BN90	BN150
Effective membrane area (m²)	0.9	1.5
Overall size(LBH)(mm)	10305106	16505106
Membrane pore size(μm)	0.2~0.4
Membrane material	PTFE/PVDF
Water yield (L/pcs·day)	450~630	750~1050
Effluent turbidity (NTU)	<1.0
Suspended solids in effluent (SS,mg/L)	<1.0

Model (All customized models are available by online inquiry)

Parameters	BN90-100	BN90-150	BN150-100	BN150-150
Number of membrane elements (pcs.)	100	150	100	150
Effective membrane area (m²)	90	135	150	225
Treatment capacity (m³/d)	45	67.5	75	112.5
Aeration capacity(m³/min)	1~1.2	1.5~1.8	1.5~2	2.25~3
Frame material	Stainless steel 304
Diffuser pipe material	Stainless steel 304/UPVC/ABS
Collection pipe material	UPVC

Advantages

Easy to clean
High efficiency / Low maintenance
Membrane modules are back flushable
Yield 60-80% less sludge than conventional system
Compact design – footprint 75% smaller than conventional
Possibility of direct and indirect water reuse

Application

FAQ

1. [Q]How to buy my ideal products?

[A] Provide us with details about your water sources, water quality, flow rate and ground area, we will analyze for you and recommend you the best water treatment solution.

2. [Q]How to change the membrane sheet?

[A]Due to unique design of the flat membrane module, flat membrane can be replaced one sheet for one time, without changing support.

3. [Q]How to clean/wash the membrane sheet?

[A]You can clean the membrane cartridges in-situ: stop the blower and switch valves, pour the chemical for 10 minutes, keep intact for a few hours.

4. [Q]How often should the membrane be washed?

[A]Usually chemical cleaning should be carried out every half a year.

5. [Q]How to install after the equipment arriving destination?

[A]We will provide detailed illustrations to you. If necessary, we will send technicians to help you.

Why choose us?

Our clients

BENENV has clients in over 37 countries!