Specifications

1.feed pellet machine with CE
2.Sawdust,straw,stalk, fertilizer and feed pellets
3.short leadtime
4.factory outlet direct

  pellet machine 0086-13598889554 

Introduction:

Our Pellet Mill is mainly used for making crude fiber materials into pellets. The materials can be sawdust, rice husk, cotton stalk, cottonseed skins, weeds and crop stalks and other plant wastes, especially low-bonding and unformed materials. It may also be applicable to biological fertilizer, organic manure as well as fertilizer for low-temperature granulation.

The machine accepts the dry materials(The moisture of raw materials is not less than the national standard of 13% ). Differential and universal joint driver is adopted. Both the motor or diesel engine are OK.

 

 

Requirements for making the pellet

 1. size of raw materials: power or no longer than 1 cm

 2. moisture content of raw materials: 18-23 %

 3. raw materials can be the mixture of 2 or more than 2 kinds different materials,  they must be evenly mixed

 4. no adhesive or chemicals need in the process

  

 

Technical parameters

Model	Power(kw)	Capacity(kg/h)	Diameter of pellets(mm)	Packing size(mm)	Weight(Kg)
PM-200	7.5	100	6-8	1150*530*750	100
PM-250	15	160	6-8	1250*600*850	150
PM -300	22	200	6-12	1300*600*900	200
PM-350	30	300-600	6-20	1300*850*1300	600
PM-400	37	600-800	6-30	1500*850*1400	700
PM-450	45	700-1000	6-30	1600*1400*800	800
PM-550	55	1000-1500	6-30	1700*850*1600	1000
PM-800	110	1500-2000	6-30	2000*1050*2050	4500

 

Main data: 

Model	Capacity (KG/H)		Power (KW)		Weight(KG)	Size(mm)
	(Sawdust/Feedstuff)
PM-150B	50-90	90-120	4	380V or 220V ,50Hz three-phase electric power	95	750×350×650
PM-200B	80-120	200-300	7.5		200	1000*430*950
PM-230B	150-200	300-400	11		290	1140×470×970
PM-260B	200-300	400-600	15		330	1220×500×1070
PM-300B	300-600	600-800	22		410	1220×600×1000
PM-400B	400-800	900-1100	30		550	1320×600×1050

 

Raw Materials:

  

 

Photos for your reference: 

 

 

 

 

Spare parts:

Finally products: