2016 JHT floating fish feed extruder machine
Detailed Description
Detailed introduction to Screw Feeding Machine:
Uses the West German technology independently to develop the successful high temperature whirlpool pump,Japanese RKC warm controls,Sweden KANTHAL electric heating thrown silk and American fluid position controller,Germany enters the water solenoid valve,and has prodeced warm controls the equipment for 10 years long time experience.
The electric heating uses the Sweden KANTAL alloy heating wire,the outside is the SVS304 stainless steel pipe,stimultaneously fills the French CA-23 high-temperature oxidation magnesium powder insulation,the efficiency is high,the humidity is uniform,the stability is extremely good.Uses European,American,the date important spare part,the failure rate is low,the service is long.
Technical Standards:
Model | JHT-1 | JHT-2 | JHT-3 | JHT-4 | JHT-5 | JHT-6 |
Temperature controlling scope | Normal temperature-98 | |||||
Temperature controlling method | Japanese RKC P.I.D adjustment | |||||
Power source(V) | 380V 50HZ | |||||
Coolant conditions | Directly cool | |||||
Heat transfer medium | Water | |||||
Thermal rating(KW) | 3 | 6 | 9 | 12 | 20 | 32 |
Pump flux(L/MIN) | 30 | 30 | 60 | 100 | 140 | 200 |
Electrical machinery power(KW) | 0.75 | 0.75 | 0.75 | 1.5 | 1.5 | 2 |
Pump current capacity(KG/CM) | 2 | 2 | 2.5 | 3 | 3 | 4 |
Cooling water disposition | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
Circulating water disposition | 1/2 | 3/4 | 3/4 | 1 | 1 | 11/4 |
External dimensions(L×W×H)MM | 640× 310× 640 | 640× 310× 640 | 640× 310× 740 | 800× 350× 740 | 800× 400× 800 | 800× 400× 900 |
Weight(KG) | 45 | 60 | 70 | 75 | 100 | 110 |
....