Specifications

Mixing with composite screw mixing blades
Solves the problem of the difference between theoretical capacity and actual capacity

1. R&D by our company on the basis of international Ⅱ Type forcing mixing technology, own the intellectual property
2. Can mix evenly in short time. The energy saving result was apparent.
3. It improves the capacity, and solves the problem of the difference between theoretical capacity and actual capacity. High efficiency and low consumption
4. the shaft ends adopts new seal and new lubricate technology, the seal among shaft end points, bearings, and shaft ends are separately, it is easy to maintain.
5. the material of screws in the mixer are ferrochromium, the outside of screws are shock resistance and anti-abrasive; the inside of screws are tough and tensile. It can mix in 50,000 times. It life is much longer.
6. There is “DZX New Position Limited” for feeder hopper. So that avoids the hopper to leave the discharging position. It is much safe.
7. the driving parts for big and middle mixers are Planetary Reducers to make sure their good performance, while the small size mixers use step-driven, so that are more economic. the accessories are from famous brand. The machines are good quality.
8. The machines are set in low place; so that the machines are work steady.
9. There is caution and sign on the machine to remind users work carefully.
10. Can do the painting as clients’ request, to try our best to meet clients’ request.
11. We provide the following items to choose:
    1. Can select to install the moving technology or not, to solve the problem in some place that can not mix absolutely.
    2. Can select to seal the bottom of discharging door or not.
    3. The open way for the bottom of discharging door, users can select the hydraulic device of pneumatic, electric or manual
    4. Users can decide to put the motor up or down according to the local condition.
    5. Users can select two points or four points for the main shaft supporter, both the two way can make sure the shaft work in line and gyration.
    6. If users have the ⅠType Mixer, we can help to upgrade it into ⅡType Mixer.

 

....