Product Details

hot sale JHS-P150 powder mixer with spray & heat system

Product Description

JHS-P type double cones mixer is used for several small batches mixing aggregated for a big batch in order to ensure the consistency of product performance, while small amount of fluid sprayed into powder materials. Therefore large capacity, spray evenly, smooth operation, safe and convenient to use is what it requires. but the requirements for mixing standard is not too high. JHS-P type double cones mixer is produced as the above requirements.

Main Features

This equipment adopts single movement mixing principle, inside the barrel stationary type 8 pieces of huge helical blades were designed, this will helps reduce equipment cost and improve mixing efficiency. When machine works, dry powder rolling at the bottom of barrel, helical blades’ function is make dry powder move to left and right and thus mixing completely. At the same time, as metering pump exists, fluid was uniformly sprayed into powder materials though nozzle. So by this simple rotating structure, mixing efficiency can be improved, and in the process of mixing, the sprayed fluid can be thoroughly mixed with dry powder.

Technical parameter

1. Mixer specification

Mixer Type	Barrel Volume(L)	Max. Loading Volume (L)	Barrel Thickness(MM)	Barrel Revolving Speed(R/M)	Blade Revolving Speed(R/M)	Motor Power (KW)
JHS-P150	150	75	2.0	24	24	1.5
JHS-P300	300	150	2.5	24	24	3
JHS-P1000	1000	500	6.0	12	12	7.5

2.Metering Pump Specification

Mixer Type	Metering Pump type	Max. Flux(L/H)	Max. Pressure (Bar)	Power (KW)
JHS-P150	KD10	10	8	0.18
JHS-P1000	KD30	30	8	0.18

Packaging & Shipping

wooden case or as customer required

30 working days after deposit received

Company Information

Zhengzhou Jin Tai Metal Materials Co., Ltd. was established in 2001.It is a mixer (also known as mixing machine) professional manufacturer. The corporation has about 125 staff, including 15 senior engineers, which integrates research and manufacture during its development. The company's production department is located in No.1 Zhongxing Road in Xinzheng city and headquartered in Weilai Garden,No 71 WeiLai Road Zhengzhou city ,which is close to the famous Zhengdong New District.

For mixing equipment, most companies are still producing the traditional equipment, some equipment didn't change over 30 years. Over the years Jin Tai cleaves to the spirits of” Made in China” in the field, devoting research to innovating in order to improve the efficiency and save more energy. At present we have the independent intellectual rights and national patent technology of our products .In the creation part of domestic mixing equipment , Jin Tai has been taking the lead.
‘Made in China’ has been the dream of several generations in industrial field. Being the main force of the independent innovation , Jin Tai has the responsibility to make a contribution to the development of Chinese industry ,and keep innovating and moving forward to make more products of high quality .

FAQ

Fluid Injection System Operating Instructions

1. Notice

A, Before use the metering pump, please add gear lubricant to oil pointer

B, Before switch on the metering pump, make sure that the pipeline is unobstructed (valve open)

C, When the metering pump stop working, make sure that shut off the metering pump firstly, then close the fluid outlet pipe valve.

D, Outlet line pressure must be greater than the inlet line pressure.

E, Avoid metering pump pumping fluid contains solid particles.

2.Inspect working position of the fluid injection system before equipment working

A, Disconnect spray pump outlet pipe

B, Make sure that there is sufficient amount of liquid in the fluid tank.

C, Open the manual power switch of the spray pump and it begin to work independently. Observe if there is liquid outflow, if yes, it means the machine is normal. Otherwise, please detect the cause of the fault.

D, Inspect spray nozzle in the barrel clogged or not, if yes, please clean up.

3.Preparation work on the fluid spray system before mixer machine starting up

A, Adjust flow rate of fluid through manual operation rotating rod behind the liquid pump (adjust the rate between 50%-100% of the rated flow).

B, Make sure that there is sufficient amount of liquid in the fluid tank.

Structure Scenograph